HEPA scan probe in three-quarter full view on a white background

Instrumen pengujian dan validasi ruang bersih

Hepa Scan Probe Hepa Scan Probe Hepa Scan Probe

An ergonomic isokinetic sampling probe for scanning HEPA filter media, frames and seals while displaying live photometer response at the operator's hand.

Isokinetic inlet for systematic HEPA face scanning.
Live response and controls at the operator's hand.
Flexible ergonomic design for overhead filter work.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This HEPA scan probe combines a shaped isokinetic inlet, flexible neck, sample hose and photometer control interface in a balanced handheld assembly. It lets the operator maintain the correct inlet orientation and scanning distance while viewing penetration response directly at the filter face. Remote valve and alarm controls reduce trips back to the base photometer during systematic media, frame and gasket scans.

Fitur utama:

Rectangular isokinetic inlet supports consistent sampling across the filter face.

Flexible neck allows comfortable nozzle alignment near ceilings and corners.

Handheld display keeps live penetration and alarm status in the operator's sightline.

Remote sampling controls streamline upstream, downstream and clear-air selection.

Secure hose and electrical connections maintain continuity during overlapping scan strokes.

Ergonomic grip reduces fatigue during large filter-bank inspections.

Kekhawatiran produk pelanggan

Effective filter scanning depends on stable inlet geometry, overlapping probe motion and continuous visibility of the photometer response.

Tilting the inlet during a scan can affect local sampling response.A shaped isokinetic nozzle and flexible neck make it easier to keep the inlet parallel to the filter face.

Looking away at a remote base unit can interrupt overlapping scan strokes.An integrated display and alarm indication keep essential response information at the probe.

Long overhead scans can cause wrist and shoulder fatigue.A balanced grip, lightweight neck and accessible controls support one-handed movement.

Loose hose or signal connections can invalidate a scan sequence.Positive-lock sample and electrical couplings resist movement during repeated passes.

Aplikasi yang Tipis

Manual scanning of installed HEPA and ULPA filtersFilter frame and gasket leak localizationCleanroom ceiling filter qualificationSertifikasi kabinet keamanan biologisScanning difficult overhead and corner locations

Parameter teknis

Typical construction values for handheld scan probes are listed below; inlet geometry, neck length and interface features can be selected for the photometer and filter layout.

Bahan inti	Molded engineering-polymer handle, stainless sampling tube, flexible neck and isokinetic inlet nozzle
Ketebalan Panel (Panel Thickness)	Typically 2.0-3.5 mm for the molded handheld housing
Efektif lebar	Approximately 90-160 mm across the sampling inlet according to nozzle selection
Panjang maksimum	Approximately 450-750 mm including flexible neck and inlet nozzle
Baja menghadap ketebalan	Typically 0.8-1.5 mm for stainless sampling tube and nozzle components
Kepadatan inti (core density)	Approximately 7800-8000 kg/m³ for stainless sampling components
Konduktivitas Termal (Thermal Conductivity)	Approximately 14-17 W/(m·K) for stainless sampling components
Permukaan selesai	Dark antistatic molded grip with satin stainless tube and blue rectangular inlet nozzle
Jenis Bersama	Quick-connect aerosol hose fitting with locking circular electrical connector and interchangeable nozzle coupling
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Rectangular and round isokinetic nozzlesStandard or extended flexible neckColor touchscreen or compact indicatorDifferent umbilical lengthsLeft- and right-handed L-probe adaptersProtective carrying case

Planning a HEPA Scan Probe specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami