HEPA scan probe in three-quarter full view on a white background

クリーンルーム試験 · 検証機器

HEPA スキャンプローブ

An ergonomic isokinetic sampling probe for scanning HEPA filter media, frames and seals while displaying live photometer response at the operator's hand.

Isokinetic inlet for systematic HEPA face scanning.
Live response and controls at the operator's hand.
Flexible ergonomic design for overhead filter work.

見積もりリクエスト製品案内

商品紹介

This HEPA scan probe combines a shaped isokinetic inlet, flexible neck, sample hose and photometer control interface in a balanced handheld assembly. It lets the operator maintain the correct inlet orientation and scanning distance while viewing penetration response directly at the filter face. Remote valve and alarm controls reduce trips back to the base photometer during systematic media, frame and gasket scans.

主要な特徴

Rectangular isokinetic inlet supports consistent sampling across the filter face.

Flexible neck allows comfortable nozzle alignment near ceilings and corners.

Handheld display keeps live penetration and alarm status in the operator's sightline.

Remote sampling controls streamline upstream, downstream and clear-air selection.

Secure hose and electrical connections maintain continuity during overlapping scan strokes.

Ergonomic grip reduces fatigue during large filter-bank inspections.

お客様の製品に関する懸念事項

Effective filter scanning depends on stable inlet geometry, overlapping probe motion and continuous visibility of the photometer response.

Tilting the inlet during a scan can affect local sampling response.A shaped isokinetic nozzle and flexible neck make it easier to keep the inlet parallel to the filter face.

Looking away at a remote base unit can interrupt overlapping scan strokes.An integrated display and alarm indication keep essential response information at the probe.

Long overhead scans can cause wrist and shoulder fatigue.A balanced grip, lightweight neck and accessible controls support one-handed movement.

Loose hose or signal connections can invalidate a scan sequence.Positive-lock sample and electrical couplings resist movement during repeated passes.

典型的な用途

Manual scanning of installed HEPA and ULPA filtersFilter frame and gasket leak localizationCleanroom ceiling filter qualification生物安全キャビネット認証Scanning difficult overhead and corner locations

技術的なパラメータ

Typical construction values for handheld scan probes are listed below; inlet geometry, neck length and interface features can be selected for the photometer and filter layout.

コア材料	Molded engineering-polymer handle, stainless sampling tube, flexible neck and isokinetic inlet nozzle
パネルの厚さ	Typically 2.0-3.5 mm for the molded handheld housing
有効幅	Approximately 90-160 mm across the sampling inlet according to nozzle selection
最大長さ	Approximately 450-750 mm including flexible neck and inlet nozzle
鋼鉄の厚さを直面する	Typically 0.8-1.5 mm for stainless sampling tube and nozzle components
コア密度	Approximately 7800-8000 kg/m³ for stainless sampling components
熱伝導率	Approximately 14-17 W/(m·K) for stainless sampling components
表面仕上げ	Dark antistatic molded grip with satin stainless tube and blue rectangular inlet nozzle
ジョイントタイプ	Quick-connect aerosol hose fitting with locking circular electrical connector and interchangeable nozzle coupling
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Rectangular and round isokinetic nozzlesStandard or extended flexible neckColor touchscreen or compact indicatorDifferent umbilical lengthsLeft- and right-handed L-probe adaptersProtective carrying case

Planning a HEPA Scan Probe specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する