English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
مربع تمرير المنطقة الخطرة
A configurable sealed pass box for controlled transfer at hazardous process boundaries, without assigning a specific area classification.
- Sealed Transfer Enclosure
- Grounding Provision
- Interlocked Access Doors
- Configurable Process Interface
مقدمة المنتج
The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.
الخصائص الرئيسية
Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.
Smooth stainless interior surfaces suit the selected cleaning practice.
Non-electrical configurations can minimise components within the transfer chamber.
Penetrations and ancillary components can be chosen for process compatibility.
مخاوف المنتج للعملاء
Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.
A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.
Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.
Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.
Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.
تطبيقات نموذجية
Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes
المعلمات الفنية
Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.
| المواد الأساسية | SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces |
|---|---|
| سمك اللوحة | 70-120 mm sealed double-wall cabinet construction |
| العرض الفعال | 400-1200 mm clear transfer width |
| الحد الأقصى الطول | Up to 1500 mm chamber depth |
| الصلب يواجه سمك | 1.0-1.5 mm stainless-steel facing |
| الكثافة الأساسية | 35-40 kg/m³ polyurethane insulation in enclosed double-wall panels |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) for polyurethane panel insulation |
| إنهاء السطح | Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process |
| نوع المشترك | Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
SUS 304 or SUS 316L enclosureMechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials
Planning a Hazardous-Area Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
