Hazardous-area pass box with grounded stainless enclosure and interlocked transfer doors

인력 및 재료 오염 제거 장비

Hazardous - Area Pass 상자

A configurable sealed pass box for controlled transfer at hazardous process boundaries, without assigning a specific area classification.

Sealed Transfer Enclosure
Grounding Provision
Interlocked Access Doors
Configurable Process Interface

견적 요청 제품 찾아보기

상품 소개

The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.

주요 기능

A bonding point supports connection of the metallic enclosure to the facility grounding system.

Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.

Smooth stainless interior surfaces suit the selected cleaning practice.

Non-electrical configurations can minimise components within the transfer chamber.

Penetrations and ancillary components can be chosen for process compatibility.

고객 제품 관심사

Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.

A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.

Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.

Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.

Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.

일반적인 응용 프로그램

Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes

기술 매개변수

Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.

핵심 재료	SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces
패널 두께	70-120 mm sealed double-wall cabinet construction
유효 폭	400-1200 mm clear transfer width
최대 길이	Up to 1500 mm chamber depth
강철 면면 두께	1. 0 - 1. 5 mm 스테인레스 스틸 면재
코어 밀도	35-40 kg/m³ polyurethane insulation in enclosed double-wall panels
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane panel insulation
표면 마무리	Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process
접합 유형	Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SUS 304 또는 SUS 316 L 케이스Mechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials

Planning a Hazardous-Area Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.