Hazardous-area pass box with grounded stainless enclosure and interlocked transfer doors

Peralatan Dekontaminasi Personil dan Bahan

Kotak Pass Daerah Berbahaya

A configurable sealed pass box for controlled transfer at hazardous process boundaries, without assigning a specific area classification.

Sealed Transfer Enclosure
Grounding Provision
Interlocked Access Doors
Configurable Process Interface

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.

Fitur utama:

A bonding point supports connection of the metallic enclosure to the facility grounding system.

Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.

Smooth stainless interior surfaces suit the selected cleaning practice.

Non-electrical configurations can minimise components within the transfer chamber.

Penetrations and ancillary components can be chosen for process compatibility.

Kekhawatiran produk pelanggan

Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.

A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.

Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.

Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.

Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.

Aplikasi yang Tipis

Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes

Parameter teknis

Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.

Bahan inti	SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces
Ketebalan Panel (Panel Thickness)	70-120 mm sealed double-wall cabinet construction
Efektif lebar	400-1200 mm clear transfer width
Panjang maksimum	Up to 1500 mm chamber depth
Baja menghadap ketebalan	1.0-1.5 mm stainless-steel facing
Kepadatan inti (core density)	35-40 kg/m³ polyurethane insulation in enclosed double-wall panels
Konduktivitas Termal (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane panel insulation
Permukaan selesai	Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process
Jenis Bersama	Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

SUS 304 atau kandang SUS 316LMechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials

Planning a Hazardous-Area Pass Box specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami