Hazardous-area pass box with grounded stainless enclosure and interlocked transfer doors

Персонал и оборудование для дезактивации материалов

Ящик для опасных районов

A configurable sealed pass box for controlled transfer at hazardous process boundaries, without assigning a specific area classification.

Sealed Transfer Enclosure
Grounding Provision
Interlocked Access Doors
Configurable Process Interface

Запрос котировки Просмотреть продукты

Введение продукции

The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.

Основные характеристики

A bonding point supports connection of the metallic enclosure to the facility grounding system.

Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.

Smooth stainless interior surfaces suit the selected cleaning practice.

Non-electrical configurations can minimise components within the transfer chamber.

Penetrations and ancillary components can be chosen for process compatibility.

Обеспокоенность клиентов продуктами

Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.

A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.

Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.

Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.

Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.

Типичные приложения

Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes

Технические параметры

Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.

Основной материал	SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces
Толщина панели	70-120 mm sealed double-wall cabinet construction
эффективная ширина	400-1200 mm clear transfer width
Максимальная длина	Up to 1500 mm chamber depth
Толщина линий стали	1.0-1.5 mm stainless-steel facing
Плотность ядра	35-40 kg/m³ polyurethane insulation in enclosed double-wall panels
Теплопроводимость	0.022-0.028 W/(m·K) for polyurethane panel insulation
Поверхностная отделка	Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process
Объединенный тип	Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

SUS 304 or SUS 316L enclosureMechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials

Planning a Hazardous-Area Pass Box specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой