English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
أرضيات البولي يوريثين الأسمنت من الصف الغذائي
A seamless polyurethane-cement floor system for wet food-production areas exposed to washdown water, hot cleaning cycles, chemicals and loaded trolley traffic.
- Seamless Hygienic Surface
- Wet-Process Durability
- Thermal-Shock Tolerance
- Integral Coved Detailing
مقدمة المنتج
Food-grade polyurethane-cement flooring combines a water-based polyurethane binder with cement, graded aggregates and mineral fillers to form a dense, trowel-applied wearing surface. The composite is built in greater thickness than a thin resin coating, helping it tolerate impact, moisture and rapid temperature changes in production rooms. Pigmented body coats can be finished smooth or with a controlled aggregate texture, while matching coving closes the floor-to-wall junction for easier washdown.
الخصائص الرئيسية
A 6–9 mm heavy-duty build accommodates more thermal and mechanical stress than a thin-film coating.
Monolithic application eliminates tile joints across the main floor field and can continue into formed perimeter coving.
Slip texture can be selected to balance wet-area traction with the cleaning method used in the room.
مخاوف المنتج للعملاء
A hygienic process floor must survive water, cleaning chemistry and temperature changes without creating open joints or an impractical surface texture.
Hot wash water followed by cold production conditions causes thin coatings to crack or debond.A thicker polyurethane-cement composite provides a compatible, stress-tolerant wearing layer over prepared concrete.
Tile grout lines retain residue and require repeated manual attention.The trowel-applied floor forms a continuous field with weld-free transitions and integral coving.
Aggressive cleaning products quickly dull or soften unsuitable resin floors.The binder and mineral aggregate system is selected for the expected food acids, alkalis and detergents.
A very rough floor improves grip but becomes slow to clean.Aggregate size and seal-coat texture are matched to wetness, slip risk and cleaning equipment.
تطبيقات نموذجية
Food and beverage processing roomsDairy and fermented-product plantsCommercial kitchens and central food factoriesCold-room entrances and washdown zonesPharmaceutical utility and preparation areas
المعلمات الفنية
Representative construction data for a heavy-duty polyurethane-cement food-processing floor are listed below.
| المواد الأساسية | Water-based polyurethane binder with Portland cement, graded mineral aggregates and active fillers |
|---|---|
| سمك اللوحة | 6–9 mm installed system thickness for heavy-duty wet-process service |
| العرض الفعال | 1000–2000 mm typical trowel-application bay width |
| الحد الأقصى الطول | Up to 6000 mm typical uninterrupted bay length between carried-through substrate joints |
| الصلب يواجه سمك | 0 mm; the resin-cement system has no steel facing |
| الكثافة الأساسية | Approximately 1900–2100 kg/m³ for the mixed polyurethane-cement mortar |
| الموصلية الحرارية | Approximately 0.8–1.2 W/(m·K) for the cured mineral-filled composite |
| إنهاء السطح | Pigmented matte polyurethane-cement with smooth, fine-textured or broadcast anti-slip finish |
| نوع المشترك | Monolithic trowel-applied field with formed coving and substrate movement joints carried through |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
4–6 mm medium-duty or 6–9 mm heavy-duty buildSmooth, fine-textured or broadcast slip-resistant finishIntegral polyurethane-cement perimeter covingProcess-zone colors and safety demarcation bands
Planning a Food-Grade Polyurethane-Cement Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
