Food-grade polyurethane-cement flooring sample with a seamless coved edge

Cleanroom Flooring Systems

Polyuréthane-ciment de qualité alimentaire

A seamless polyurethane-cement floor system for wet food-production areas exposed to washdown water, hot cleaning cycles, chemicals and loaded trolley traffic.

Seamless Hygienic Surface
Wet-Process Durability
Thermal-Shock Tolerance
Integral Coved Detailing

Demander un devis. Browse les produits

Introduction de produit

Food-grade polyurethane-cement flooring combines a water-based polyurethane binder with cement, graded aggregates and mineral fillers to form a dense, trowel-applied wearing surface. The composite is built in greater thickness than a thin resin coating, helping it tolerate impact, moisture and rapid temperature changes in production rooms. Pigmented body coats can be finished smooth or with a controlled aggregate texture, while matching coving closes the floor-to-wall junction for easier washdown.

Key Features

The polyurethane-cement matrix remains cohesive under repeated wet cleaning and common food-process chemical exposure.

A 6–9 mm heavy-duty build accommodates more thermal and mechanical stress than a thin-film coating.

Monolithic application eliminates tile joints across the main floor field and can continue into formed perimeter coving.

Slip texture can be selected to balance wet-area traction with the cleaning method used in the room.

Préoccupations du client produit

A hygienic process floor must survive water, cleaning chemistry and temperature changes without creating open joints or an impractical surface texture.

Hot wash water followed by cold production conditions causes thin coatings to crack or debond.A thicker polyurethane-cement composite provides a compatible, stress-tolerant wearing layer over prepared concrete.

Tile grout lines retain residue and require repeated manual attention.The trowel-applied floor forms a continuous field with weld-free transitions and integral coving.

Aggressive cleaning products quickly dull or soften unsuitable resin floors.The binder and mineral aggregate system is selected for the expected food acids, alkalis and detergents.

A very rough floor improves grip but becomes slow to clean.Aggregate size and seal-coat texture are matched to wetness, slip risk and cleaning equipment.

Les applications typiques

Food and beverage processing roomsDairy and fermented-product plantsCommercial kitchens and central food factoriesCold-room entrances and washdown zonesPharmaceutical utility and preparation areas

Paramètres techniques

Representative construction data for a heavy-duty polyurethane-cement food-processing floor are listed below.

Matériaux de base	Water-based polyurethane binder with Portland cement, graded mineral aggregates and active fillers
Panneau épaisseur	6–9 mm installed system thickness for heavy-duty wet-process service
Largeur effective	1000–2000 mm typical trowel-application bay width
Longueur maximale	Up to 6000 mm typical uninterrupted bay length between carried-through substrate joints
Acier face épaisseur	0 mm; the resin-cement system has no steel facing
Densité Core	Approximately 1900–2100 kg/m³ for the mixed polyurethane-cement mortar
Conductivité thermique	Approximately 0.8–1.2 W/(m·K) for the cured mineral-filled composite
surface finie	Pigmented matte polyurethane-cement with smooth, fine-textured or broadcast anti-slip finish
Type joint	Monolithic trowel-applied field with formed coving and substrate movement joints carried through
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

4–6 mm medium-duty or 6–9 mm heavy-duty buildSmooth, fine-textured or broadcast slip-resistant finishIntegral polyurethane-cement perimeter covingProcess-zone colors and safety demarcation bands

Planning a Food-Grade Polyurethane-Cement Flooring specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe