English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD الحبل التأريض
The ESD Grounding Cord is a flexible coiled lead that connects a wrist strap or garment snap to an approved workstation grounding point.
- Retractile coil follows operator movement while limiting loose cable.
- Molded resistor housing supports controlled personnel grounding.
- Standard snap and banana interfaces connect common ESD hardware.
مقدمة المنتج
Stranded copper conductors are protected by a durable polyurethane jacket formed into a retractile coil. Molded strain relief supports both ends, while the snap socket joins wearable grounding equipment and the banana plug connects to a common-point ground or tester. Selected personnel cords incorporate a current-limiting resistor in the termination assembly.
الخصائص الرئيسية
Flexible insulation tolerates repeated operator movement.
Molded strain relief reduces bending stress at terminations.
Detachable snap allows rapid replacement and testing.
Banana plug fits standard workstation grounding jacks.
Optional clip adapter supports temporary approved connections.
مخاوف المنتج للعملاء
Cord reliability depends on correct resistance, durable strain relief, secure terminations and enough working reach without unmanaged cable.
Straight cable drapes across the work surface.A retractile coil shortens the cord when full reach is unnecessary.
Repeated flexing breaks conductors near the plug.Molded strain relief distributes bending away from the termination.
The cord pulls free during normal movement.Positive snap and spring-contact banana plug maintain defined connections.
An unsuitable cord bypasses personnel protection resistance.Specified personnel versions include a molded current-limiting resistor.
An intermittent lead looks normal externally.Detachable construction permits separate continuity and resistance checks.
تطبيقات نموذجية
Wrist-strap grounding at assembly benches.Groundable garment connections.Portable ESD service kits.Workstation common-point grounding.Personnel tester connections.
المعلمات الفنية
The following values describe common single-wire personnel grounding cords; snap size, extended length, resistor and terminal format can be configured.
| المواد الأساسية | Stranded copper conductor with polyurethane insulation |
|---|---|
| سمك اللوحة | 2.5–4.0 mm finished cable diameter |
| العرض الفعال | 18–28 mm molded snap-head width |
| الحد الأقصى الطول | Up to 3600 mm extended coil length |
| الصلب يواجه سمك | 0.5 mm nominal stainless snap-contact thickness |
| الكثافة الأساسية | 1100–1250 kg/m³ polyurethane jacket density |
| الموصلية الحرارية | 0.16–0.22 W/(m·K) |
| إنهاء السطح | Black molded polyurethane with nickel-plated metal contacts |
| نوع المشترك | Female snap to coiled lead, molded resistor housing and banana plug |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
4 mm or 10 mm snap socket.1.5–3.6 m extended coil lengths.One-megohm or alternative specified resistance.Straight or right-angle banana plug.Alligator-clip or ring-terminal adapter.Single-wire and monitor-compatible dual-wire formats.
Planning a ESD Grounding Cord specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
