Black coiled ESD grounding cord with snap banana plug resistor and clip

ESD 및 정전기 방지 제품

ESD 접지 코드

The ESD Grounding Cord is a flexible coiled lead that connects a wrist strap or garment snap to an approved workstation grounding point.

Retractile coil follows operator movement while limiting loose cable.
Molded resistor housing supports controlled personnel grounding.
Standard snap and banana interfaces connect common ESD hardware.

견적 요청 제품 찾아보기

상품 소개

Stranded copper conductors are protected by a durable polyurethane jacket formed into a retractile coil. Molded strain relief supports both ends, while the snap socket joins wearable grounding equipment and the banana plug connects to a common-point ground or tester. Selected personnel cords incorporate a current-limiting resistor in the termination assembly.

주요 기능

Coiled geometry provides working reach with compact retraction.

Flexible insulation tolerates repeated operator movement.

Molded strain relief reduces bending stress at terminations.

Detachable snap allows rapid replacement and testing.

Banana plug fits standard workstation grounding jacks.

Optional clip adapter supports temporary approved connections.

고객 제품 관심사

Cord reliability depends on correct resistance, durable strain relief, secure terminations and enough working reach without unmanaged cable.

Straight cable drapes across the work surface.A retractile coil shortens the cord when full reach is unnecessary.

Repeated flexing breaks conductors near the plug.Molded strain relief distributes bending away from the termination.

The cord pulls free during normal movement.Positive snap and spring-contact banana plug maintain defined connections.

An unsuitable cord bypasses personnel protection resistance.Specified personnel versions include a molded current-limiting resistor.

An intermittent lead looks normal externally.Detachable construction permits separate continuity and resistance checks.

일반적인 응용 프로그램

Wrist-strap grounding at assembly benches.Groundable garment connections.Portable ESD service kits.Workstation common-point grounding.Personnel tester connections.

기술 매개변수

The following values describe common single-wire personnel grounding cords; snap size, extended length, resistor and terminal format can be configured.

핵심 재료	Stranded copper conductor with polyurethane insulation
패널 두께	2.5–4.0 mm finished cable diameter
유효 폭	18–28 mm molded snap-head width
최대 길이	Up to 3600 mm extended coil length
강철 면면 두께	0.5 mm nominal stainless snap-contact thickness
코어 밀도	1100–1250 kg/m³ polyurethane jacket density
열전도도 (Thermal Conductivity)	0.16–0.22 W/(m·K)
표면 마무리	Black molded polyurethane with nickel-plated metal contacts
접합 유형	Female snap to coiled lead, molded resistor housing and banana plug
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

4 mm or 10 mm snap socket.1.5–3.6 m extended coil lengths.One-megohm or alternative specified resistance.Straight or right-angle banana plug.Alligator-clip or ring-terminal adapter.Single-wire and monitor-compatible dual-wire formats.

Planning a ESD Grounding Cord specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.