Black coiled ESD grounding cord with snap banana plug resistor and clip

ESD および帯電防止製品

ESD 接地コード

The ESD Grounding Cord is a flexible coiled lead that connects a wrist strap or garment snap to an approved workstation grounding point.

Retractile coil follows operator movement while limiting loose cable.
Molded resistor housing supports controlled personnel grounding.
Standard snap and banana interfaces connect common ESD hardware.

見積もりリクエスト製品案内

商品紹介

Stranded copper conductors are protected by a durable polyurethane jacket formed into a retractile coil. Molded strain relief supports both ends, while the snap socket joins wearable grounding equipment and the banana plug connects to a common-point ground or tester. Selected personnel cords incorporate a current-limiting resistor in the termination assembly.

主要な特徴

Coiled geometry provides working reach with compact retraction.

Flexible insulation tolerates repeated operator movement.

Molded strain relief reduces bending stress at terminations.

Detachable snap allows rapid replacement and testing.

Banana plug fits standard workstation grounding jacks.

Optional clip adapter supports temporary approved connections.

お客様の製品に関する懸念事項

Cord reliability depends on correct resistance, durable strain relief, secure terminations and enough working reach without unmanaged cable.

Straight cable drapes across the work surface.A retractile coil shortens the cord when full reach is unnecessary.

Repeated flexing breaks conductors near the plug.Molded strain relief distributes bending away from the termination.

The cord pulls free during normal movement.Positive snap and spring-contact banana plug maintain defined connections.

An unsuitable cord bypasses personnel protection resistance.Specified personnel versions include a molded current-limiting resistor.

An intermittent lead looks normal externally.Detachable construction permits separate continuity and resistance checks.

典型的な用途

Wrist-strap grounding at assembly benches.Groundable garment connections.Portable ESD service kits.Workstation common-point grounding.Personnel tester connections.

技術的なパラメータ

The following values describe common single-wire personnel grounding cords; snap size, extended length, resistor and terminal format can be configured.

コア材料	Stranded copper conductor with polyurethane insulation
パネルの厚さ	2.5–4.0 mm finished cable diameter
有効幅	18–28 mm molded snap-head width
最大長さ	Up to 3600 mm extended coil length
鋼鉄の厚さを直面する	0.5 mm nominal stainless snap-contact thickness
コア密度	1100–1250 kg/m³ polyurethane jacket density
熱伝導率	0.16–0.22 W/(m·K)
表面仕上げ	Black molded polyurethane with nickel-plated metal contacts
ジョイントタイプ	Female snap to coiled lead, molded resistor housing and banana plug
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

4 mm or 10 mm snap socket.1.5–3.6 m extended coil lengths.One-megohm or alternative specified resistance.Straight or right-angle banana plug.Alligator-clip or ring-terminal adapter.Single-wire and monitor-compatible dual-wire formats.

Planning a ESD Grounding Cord specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する