Black coiled ESD grounding cord with snap banana plug resistor and clip

Produk ESD dan Antistatik

Cord Grounding ESD

The ESD Grounding Cord is a flexible coiled lead that connects a wrist strap or garment snap to an approved workstation grounding point.

Retractile coil follows operator movement while limiting loose cable.
Molded resistor housing supports controlled personnel grounding.
Standard snap and banana interfaces connect common ESD hardware.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Stranded copper conductors are protected by a durable polyurethane jacket formed into a retractile coil. Molded strain relief supports both ends, while the snap socket joins wearable grounding equipment and the banana plug connects to a common-point ground or tester. Selected personnel cords incorporate a current-limiting resistor in the termination assembly.

Ciri-ciri Utama

Coiled geometry provides working reach with compact retraction.

Flexible insulation tolerates repeated operator movement.

Molded strain relief reduces bending stress at terminations.

Detachable snap allows rapid replacement and testing.

Banana plug fits standard workstation grounding jacks.

Optional clip adapter supports temporary approved connections.

Kebimbangan Produk Pelanggan

Cord reliability depends on correct resistance, durable strain relief, secure terminations and enough working reach without unmanaged cable.

Straight cable drapes across the work surface.A retractile coil shortens the cord when full reach is unnecessary.

Repeated flexing breaks conductors near the plug.Molded strain relief distributes bending away from the termination.

The cord pulls free during normal movement.Positive snap and spring-contact banana plug maintain defined connections.

An unsuitable cord bypasses personnel protection resistance.Specified personnel versions include a molded current-limiting resistor.

An intermittent lead looks normal externally.Detachable construction permits separate continuity and resistance checks.

Permohonan yang biasa

Wrist-strap grounding at assembly benches.Groundable garment connections.Portable ESD service kits.Workstation common-point grounding.Personnel tester connections.

Parameter teknikal

The following values describe common single-wire personnel grounding cords; snap size, extended length, resistor and terminal format can be configured.

Bahan Teras	Stranded copper conductor with polyurethane insulation
Ketebalan Panel	2.5–4.0 mm finished cable diameter
Lebar berkesan	18–28 mm molded snap-head width
Panjang maksimum	Up to 3600 mm extended coil length
Keluli Menghadapi Ketebalan	0.5 mm nominal stainless snap-contact thickness
Ketumpatan teras	1100–1250 kg/m³ polyurethane jacket density
Kekonduksian Terma	0.16–0.22 W/(m·K)
Kemasan permukaan	Black molded polyurethane with nickel-plated metal contacts
Jenis Bersatu	Female snap to coiled lead, molded resistor housing and banana plug
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

4 mm or 10 mm snap socket.1.5–3.6 m extended coil lengths.One-megohm or alternative specified resistance.Straight or right-angle banana plug.Alligator-clip or ring-terminal adapter.Single-wire and monitor-compatible dual-wire formats.

Planning a ESD Grounding Cord specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami