English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
محطة عمل استخراج الغبار
A compact rear-draft bench that captures dust at the work surface during small-scale weighing, opening, transfer and cleanup tasks.
- Rear-Draft Capture Wall
- Compact Powder Workbench
- Integrated Stainless Surface
- Front-Access Filter Service
مقدمة المنتج
The dust extraction workstation concentrates capture at a perforated rear wall rather than enclosing a full booth. Powder released close to the stainless worktop is drawn horizontally away from the operator and through a staged filter compartment below or behind the bench. A raised rear lip, side screens and recessed utility panel keep the handling area organized. The compact format suits lower-volume tasks whose material risk and capture requirement are compatible with a ventilated workbench.
الخصائص الرئيسية
Side screens reduce cross-drafts without enclosing the operator.
A raised worktop edge helps keep loose granules within the cleaning area.
Front-access prefilters simplify routine service in tight laboratory layouts.
A removable stainless tray exposes the lower spill collection surface.
مخاوف المنتج للعملاء
A compact capture bench must draw dust from the active point without pulling light samples, balance pans or paperwork into the return wall.
A full walk-in booth is too large for occasional small tasks.The rear-draft bench concentrates extraction at one defined work surface.
Strong suction disturbs lightweight samples.A broad perforated wall distributes capture velocity over a larger area.
Powder rolls off a flat open worktop.Raised rear and side edges retain granules within the cleaning zone.
The filter compartment is blocked by fixed casework.Front-access doors allow prefilter service without rear clearance.
تطبيقات نموذجية
Small-scale powder weighingTablet sample handlingDry ingredient subdivisionDusty tool cleanup
المعلمات الفنية
Typical configurable construction ranges for a compact dust extraction workstation are listed below.
| المواد الأساسية | SUS304 worktop and perforated capture wall with powder-coated steel filter cabinet and mineral-wool acoustic lining |
|---|---|
| سمك اللوحة | 25-50 mm double-skin extraction cabinet sections |
| العرض الفعال | 700-1800 mm clear working width |
| الحد الأقصى الطول | Up to 1200 mm overall workstation depth |
| الصلب يواجه سمك | 1.0-1.5 mm SUS304 work surfaces; 0.8-1.2 mm outer steel |
| الكثافة الأساسية | 80-120 kg/m³ mineral-wool acoustic lining |
| الموصلية الحرارية | 0.035-0.045 W/(m·K) for the acoustic lining |
| إنهاء السطح | Brushed SUS304 work zone with low-sheen powder-coated service cabinet |
| نوع المشترك | Welded work tray with gasketed front filter doors and bolted perforated capture panel |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Ducted or filtered recirculating exhaustSafe-change filter collarAnti-vibration balance slabClear side screens
Planning a Dust Extraction Workstation specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
