Compact dust extraction workstation with perforated rear capture wall

Aliran Laminar dan Peralatan Pengekangan

Stesen kerja pengekstrakan habuk

A compact rear-draft bench that captures dust at the work surface during small-scale weighing, opening, transfer and cleanup tasks.

Rear-Draft Capture Wall
Compact Powder Workbench
Integrated Stainless Surface
Front-Access Filter Service

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The dust extraction workstation concentrates capture at a perforated rear wall rather than enclosing a full booth. Powder released close to the stainless worktop is drawn horizontally away from the operator and through a staged filter compartment below or behind the bench. A raised rear lip, side screens and recessed utility panel keep the handling area organized. The compact format suits lower-volume tasks whose material risk and capture requirement are compatible with a ventilated workbench.

Ciri-ciri Utama

A perforated rear wall captures dust close to open containers and tools.

Side screens reduce cross-drafts without enclosing the operator.

A raised worktop edge helps keep loose granules within the cleaning area.

Front-access prefilters simplify routine service in tight laboratory layouts.

A removable stainless tray exposes the lower spill collection surface.

Kebimbangan Produk Pelanggan

A compact capture bench must draw dust from the active point without pulling light samples, balance pans or paperwork into the return wall.

A full walk-in booth is too large for occasional small tasks.The rear-draft bench concentrates extraction at one defined work surface.

Strong suction disturbs lightweight samples.A broad perforated wall distributes capture velocity over a larger area.

Powder rolls off a flat open worktop.Raised rear and side edges retain granules within the cleaning zone.

The filter compartment is blocked by fixed casework.Front-access doors allow prefilter service without rear clearance.

Permohonan yang biasa

Small-scale powder weighingTablet sample handlingDry ingredient subdivisionDusty tool cleanup

Parameter teknikal

Typical configurable construction ranges for a compact dust extraction workstation are listed below.

Bahan Teras	SUS304 worktop and perforated capture wall with powder-coated steel filter cabinet and mineral-wool acoustic lining
Ketebalan Panel	25-50 mm double-skin extraction cabinet sections
Lebar berkesan	700-1800 mm clear working width
Panjang maksimum	Up to 1200 mm overall workstation depth
Keluli Menghadapi Ketebalan	1.0-1.5 mm SUS304 work surfaces; 0.8-1.2 mm outer steel
Ketumpatan teras	80-120 kg / m3 lapisan akustik bulu mineral
Kekonduksian Terma	0.035-0.045 W / (m · K) untuk lapisan akustik
Kemasan permukaan	Brushed SUS304 work zone with low-sheen powder-coated service cabinet
Jenis Bersatu	Welded work tray with gasketed front filter doors and bolted perforated capture panel
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Ducted or filtered recirculating exhaustSafe-change filter collarAnti-vibration balance slabClear side screens

Planning a Dust Extraction Workstation specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami