English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Рабочая станция для удаления пыли
A compact rear-draft bench that captures dust at the work surface during small-scale weighing, opening, transfer and cleanup tasks.
- Rear-Draft Capture Wall
- Compact Powder Workbench
- Integrated Stainless Surface
- Front-Access Filter Service
Введение продукции
The dust extraction workstation concentrates capture at a perforated rear wall rather than enclosing a full booth. Powder released close to the stainless worktop is drawn horizontally away from the operator and through a staged filter compartment below or behind the bench. A raised rear lip, side screens and recessed utility panel keep the handling area organized. The compact format suits lower-volume tasks whose material risk and capture requirement are compatible with a ventilated workbench.
Основные характеристики
Side screens reduce cross-drafts without enclosing the operator.
A raised worktop edge helps keep loose granules within the cleaning area.
Front-access prefilters simplify routine service in tight laboratory layouts.
A removable stainless tray exposes the lower spill collection surface.
Обеспокоенность клиентов продуктами
A compact capture bench must draw dust from the active point without pulling light samples, balance pans or paperwork into the return wall.
A full walk-in booth is too large for occasional small tasks.The rear-draft bench concentrates extraction at one defined work surface.
Strong suction disturbs lightweight samples.A broad perforated wall distributes capture velocity over a larger area.
Powder rolls off a flat open worktop.Raised rear and side edges retain granules within the cleaning zone.
The filter compartment is blocked by fixed casework.Front-access doors allow prefilter service without rear clearance.
Типичные приложения
Small-scale powder weighingTablet sample handlingDry ingredient subdivisionDusty tool cleanup
Технические параметры
Typical configurable construction ranges for a compact dust extraction workstation are listed below.
| Основной материал | SUS304 worktop and perforated capture wall with powder-coated steel filter cabinet and mineral-wool acoustic lining |
|---|---|
| Толщина панели | 25-50 mm double-skin extraction cabinet sections |
| эффективная ширина | 700-1800 mm clear working width |
| Максимальная длина | Up to 1200 mm overall workstation depth |
| Толщина линий стали | 1.0-1.5 mm SUS304 work surfaces; 0.8-1.2 mm outer steel |
| Плотность ядра | 80-120 kg/m³ mineral-wool acoustic lining |
| Теплопроводимость | 0.035-0.045 W/(m·K) for the acoustic lining |
| Поверхностная отделка | Brushed SUS304 work zone with low-sheen powder-coated service cabinet |
| Объединенный тип | Welded work tray with gasketed front filter doors and bolted perforated capture panel |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Ducted or filtered recirculating exhaustSafe-change filter collarAnti-vibration balance slabClear side screens
Planning a Dust Extraction Workstation specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
