İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Toz Çıkarma İş İstasyonu
A compact rear-draft bench that captures dust at the work surface during small-scale weighing, opening, transfer and cleanup tasks.
- Rear-Draft Capture Wall
- Compact Powder Workbench
- Integrated Stainless Surface
- Front-Access Filter Service
Ürün tanıtımı
The dust extraction workstation concentrates capture at a perforated rear wall rather than enclosing a full booth. Powder released close to the stainless worktop is drawn horizontally away from the operator and through a staged filter compartment below or behind the bench. A raised rear lip, side screens and recessed utility panel keep the handling area organized. The compact format suits lower-volume tasks whose material risk and capture requirement are compatible with a ventilated workbench.
Ana Özellikler
Side screens reduce cross-drafts without enclosing the operator.
A raised worktop edge helps keep loose granules within the cleaning area.
Front-access prefilters simplify routine service in tight laboratory layouts.
A removable stainless tray exposes the lower spill collection surface.
Müşteri Ürün Sorunları
A compact capture bench must draw dust from the active point without pulling light samples, balance pans or paperwork into the return wall.
A full walk-in booth is too large for occasional small tasks.The rear-draft bench concentrates extraction at one defined work surface.
Strong suction disturbs lightweight samples.A broad perforated wall distributes capture velocity over a larger area.
Powder rolls off a flat open worktop.Raised rear and side edges retain granules within the cleaning zone.
The filter compartment is blocked by fixed casework.Front-access doors allow prefilter service without rear clearance.
Tipik uygulamalar
Small-scale powder weighingTablet sample handlingDry ingredient subdivisionDusty tool cleanup
Teknik parametreler
Typical configurable construction ranges for a compact dust extraction workstation are listed below.
| Temel malzemeler | SUS304 worktop and perforated capture wall with powder-coated steel filter cabinet and mineral-wool acoustic lining |
|---|---|
| Panel kalınlığı | 25-50 mm double-skin extraction cabinet sections |
| Effective Width (Etkili Genişlik) | 700-1800 mm clear working width |
| Maksimum uzunluk | Up to 1200 mm overall workstation depth |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm SUS304 work surfaces; 0.8-1.2 mm outer steel |
| Core Density (Çekirdek Yoğunluğu) | 80-120 kg/m³ mineral-wool acoustic lining |
| Termal İletkenlik | 0.035-0.045 W/(m·K) for the acoustic lining |
| Yüzey bitirme | Brushed SUS304 work zone with low-sheen powder-coated service cabinet |
| Ortak tip | Welded work tray with gasketed front filter doors and bolted perforated capture panel |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Ducted or filtered recirculating exhaustSafe-change filter collarAnti-vibration balance slabClear side screens
Planning a Dust Extraction Workstation specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
