English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
زجاجة عينة غرفة نظيفة
Natural translucent HDPE cleanroom sample bottle with a wide neck and leak-resistant linerless polypropylene screw closure.
- Wide-mouth HDPE bottle allows clean filling and sample recovery
- Linerless polypropylene closure reduces loose sealing components
- Translucent body supports quick fill-level inspection
مقدمة المنتج
The Cleanroom Sample Bottle pairs a durable high-density polyethylene body with a one-piece polypropylene screw cap. Its wide mouth supports transfer of liquids, powders and small solids, while the translucent wall permits visual level checks. A molded sealing ring inside the closure contacts the beveled neck without a separate cap liner.
الخصائص الرئيسية
HDPE body offers broad compatibility with many aqueous samples
Linerless PP cap removes a potential loose-particle component
Uniform cylindrical wall resists splitting during routine handling
Flat stable base supports bench labeling and staging
مخاوف المنتج للعملاء
Sample integrity depends on material compatibility, clean closure surfaces and consistent identification. Cross-threaded caps, incompatible chemicals or unverified reuse can compromise the container.
Liquid may leak if the cap starts on the thread incorrectly.Start the closure squarely and apply a consistent closing procedure.
Residue on the neck land can interrupt the seal.Keep the sealing land dry and free of powder before capping.
Some solvents can permeate or stress HDPE over time.Check chemical compatibility and storage duration for the selected resin.
Reused bottles may retain traces from a previous sample.Use single-use bottles or a validated cleaning method for critical sampling.
تطبيقات نموذجية
For collecting and holding water, process liquids, powders, granules, cleaning-validation samples and environmental-monitoring specimens in controlled production and laboratory areas.
المعلمات الفنية
The following ranges cover common HDPE clean sample bottles from small laboratory formats to one-liter containers. Final capacity, mouth size and packaging should match the sampling method.
| المواد الأساسية | Natural high-density polyethylene bottle with polypropylene closure |
|---|---|
| سمك اللوحة | 1.0-2.5 mm nominal bottle wall |
| العرض الفعال | 35-100 mm bottle diameter |
| الحد الأقصى الطول | 250 mm overall height with closure |
| الصلب يواجه سمك | 0 mm; all-polymer container |
| الكثافة الأساسية | 940-970 kg/m³ HDPE body |
| الموصلية الحرارية | 0.42-0.52 W/(m·K), typical HDPE range |
| إنهاء السطح | Smooth natural translucent bottle with white ribbed cap |
| نوع المشترك | Wide-mouth threaded neck with one-piece linerless PP screw closure |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
60-1000 mL nominal capacityWide-mouth or narrow-mouth neckNatural translucent or opaque light-protective bodyStandard, tamper-evident or tethered capSterile or non-sterile presentationIndividual, tray-packed or double-bagged supply
Planning a Cleanroom Sample Bottle specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
