Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom échantillon de bouteille
Natural translucent HDPE cleanroom sample bottle with a wide neck and leak-resistant linerless polypropylene screw closure.
- Wide-mouth HDPE bottle allows clean filling and sample recovery
- Linerless polypropylene closure reduces loose sealing components
- Translucent body supports quick fill-level inspection
Introduction de produit
The Cleanroom Sample Bottle pairs a durable high-density polyethylene body with a one-piece polypropylene screw cap. Its wide mouth supports transfer of liquids, powders and small solids, while the translucent wall permits visual level checks. A molded sealing ring inside the closure contacts the beveled neck without a separate cap liner.
Key Features
HDPE body offers broad compatibility with many aqueous samples
Linerless PP cap removes a potential loose-particle component
Uniform cylindrical wall resists splitting during routine handling
Flat stable base supports bench labeling and staging
Préoccupations du client produit
Sample integrity depends on material compatibility, clean closure surfaces and consistent identification. Cross-threaded caps, incompatible chemicals or unverified reuse can compromise the container.
Liquid may leak if the cap starts on the thread incorrectly.Start the closure squarely and apply a consistent closing procedure.
Residue on the neck land can interrupt the seal.Keep the sealing land dry and free of powder before capping.
Some solvents can permeate or stress HDPE over time.Check chemical compatibility and storage duration for the selected resin.
Reused bottles may retain traces from a previous sample.Use single-use bottles or a validated cleaning method for critical sampling.
Les applications typiques
For collecting and holding water, process liquids, powders, granules, cleaning-validation samples and environmental-monitoring specimens in controlled production and laboratory areas.
Paramètres techniques
The following ranges cover common HDPE clean sample bottles from small laboratory formats to one-liter containers. Final capacity, mouth size and packaging should match the sampling method.
| Matériaux de base | Natural high-density polyethylene bottle with polypropylene closure |
|---|---|
| Panneau épaisseur | 1.0-2.5 mm nominal bottle wall |
| Largeur effective | 35-100 mm bottle diameter |
| Longueur maximale | 250 mm overall height with closure |
| Acier face épaisseur | 0 mm; all-polymer container |
| Densité Core | 940-970 kg/m³ HDPE body |
| Conductivité thermique | 0.42-0.52 W/(m·K), typical HDPE range |
| surface finie | Smooth natural translucent bottle with white ribbed cap |
| Type joint | Wide-mouth threaded neck with one-piece linerless PP screw closure |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
60-1000 mL nominal capacityWide-mouth or narrow-mouth neckNatural translucent or opaque light-protective bodyStandard, tamper-evident or tethered capSterile or non-sterile presentationIndividual, tray-packed or double-bagged supply
Planning a Cleanroom Sample Bottle specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
