English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Образец бутылки для чистых помещений
Natural translucent HDPE cleanroom sample bottle with a wide neck and leak-resistant linerless polypropylene screw closure.
- Wide-mouth HDPE bottle allows clean filling and sample recovery
- Linerless polypropylene closure reduces loose sealing components
- Translucent body supports quick fill-level inspection
Введение продукции
The Cleanroom Sample Bottle pairs a durable high-density polyethylene body with a one-piece polypropylene screw cap. Its wide mouth supports transfer of liquids, powders and small solids, while the translucent wall permits visual level checks. A molded sealing ring inside the closure contacts the beveled neck without a separate cap liner.
Основные характеристики
HDPE body offers broad compatibility with many aqueous samples
Linerless PP cap removes a potential loose-particle component
Uniform cylindrical wall resists splitting during routine handling
Flat stable base supports bench labeling and staging
Обеспокоенность клиентов продуктами
Sample integrity depends on material compatibility, clean closure surfaces and consistent identification. Cross-threaded caps, incompatible chemicals or unverified reuse can compromise the container.
Liquid may leak if the cap starts on the thread incorrectly.Start the closure squarely and apply a consistent closing procedure.
Residue on the neck land can interrupt the seal.Keep the sealing land dry and free of powder before capping.
Some solvents can permeate or stress HDPE over time.Check chemical compatibility and storage duration for the selected resin.
Reused bottles may retain traces from a previous sample.Use single-use bottles or a validated cleaning method for critical sampling.
Типичные приложения
For collecting and holding water, process liquids, powders, granules, cleaning-validation samples and environmental-monitoring specimens in controlled production and laboratory areas.
Технические параметры
The following ranges cover common HDPE clean sample bottles from small laboratory formats to one-liter containers. Final capacity, mouth size and packaging should match the sampling method.
| Основной материал | Natural high-density polyethylene bottle with polypropylene closure |
|---|---|
| Толщина панели | 1.0-2.5 mm nominal bottle wall |
| эффективная ширина | 35-100 mm bottle diameter |
| Максимальная длина | 250 mm overall height with closure |
| Толщина линий стали | 0 mm; all-polymer container |
| Плотность ядра | 940-970 kg/m³ HDPE body |
| Теплопроводимость | 0.42-0.52 W/(m·K), typical HDPE range |
| Поверхностная отделка | Smooth natural translucent bottle with white ribbed cap |
| Объединенный тип | Wide-mouth threaded neck with one-piece linerless PP screw closure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
60-1000 mL nominal capacityWide-mouth or narrow-mouth neckNatural translucent or opaque light-protective bodyStandard, tamper-evident or tethered capSterile or non-sterile presentationIndividual, tray-packed or double-bagged supply
Planning a Cleanroom Sample Bottle specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
