Translucent HDPE cleanroom sample bottle in complete three-quarter view

클린룸 의류, PPE 및 소모품

클린룸 샘플 병

Natural translucent HDPE cleanroom sample bottle with a wide neck and leak-resistant linerless polypropylene screw closure.

Wide-mouth HDPE bottle allows clean filling and sample recovery
Linerless polypropylene closure reduces loose sealing components
Translucent body supports quick fill-level inspection

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Sample Bottle pairs a durable high-density polyethylene body with a one-piece polypropylene screw cap. Its wide mouth supports transfer of liquids, powders and small solids, while the translucent wall permits visual level checks. A molded sealing ring inside the closure contacts the beveled neck without a separate cap liner.

주요 기능

Wide opening simplifies aseptic or gloved filling

HDPE body offers broad compatibility with many aqueous samples

Linerless PP cap removes a potential loose-particle component

Uniform cylindrical wall resists splitting during routine handling

Flat stable base supports bench labeling and staging

고객 제품 관심사

Sample integrity depends on material compatibility, clean closure surfaces and consistent identification. Cross-threaded caps, incompatible chemicals or unverified reuse can compromise the container.

Liquid may leak if the cap starts on the thread incorrectly.Start the closure squarely and apply a consistent closing procedure.

Residue on the neck land can interrupt the seal.Keep the sealing land dry and free of powder before capping.

Some solvents can permeate or stress HDPE over time.Check chemical compatibility and storage duration for the selected resin.

Reused bottles may retain traces from a previous sample.Use single-use bottles or a validated cleaning method for critical sampling.

일반적인 응용 프로그램

For collecting and holding water, process liquids, powders, granules, cleaning-validation samples and environmental-monitoring specimens in controlled production and laboratory areas.

기술 매개변수

The following ranges cover common HDPE clean sample bottles from small laboratory formats to one-liter containers. Final capacity, mouth size and packaging should match the sampling method.

핵심 재료	Natural high-density polyethylene bottle with polypropylene closure
패널 두께	1.0-2.5 mm nominal bottle wall
유효 폭	35-100 mm bottle diameter
최대 길이	250 mm overall height with closure
강철 면면 두께	0 mm; all-polymer container
코어 밀도	940-970 kg/m³ HDPE body
열전도도 (Thermal Conductivity)	0.42-0.52 W/(m·K), typical HDPE range
표면 마무리	Smooth natural translucent bottle with white ribbed cap
접합 유형	Wide-mouth threaded neck with one-piece linerless PP screw closure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

60-1000 mL nominal capacityWide-mouth or narrow-mouth neckNatural translucent or opaque light-protective bodyStandard, tamper-evident or tethered capSterile or non-sterile presentationIndividual, tray-packed or double-bagged supply

Planning a Cleanroom Sample Bottle specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.