Translucent HDPE cleanroom sample bottle in complete three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームサンプルボトル

Natural translucent HDPE cleanroom sample bottle with a wide neck and leak-resistant linerless polypropylene screw closure.

Wide-mouth HDPE bottle allows clean filling and sample recovery
Linerless polypropylene closure reduces loose sealing components
Translucent body supports quick fill-level inspection

見積もりリクエスト製品案内

商品紹介

The Cleanroom Sample Bottle pairs a durable high-density polyethylene body with a one-piece polypropylene screw cap. Its wide mouth supports transfer of liquids, powders and small solids, while the translucent wall permits visual level checks. A molded sealing ring inside the closure contacts the beveled neck without a separate cap liner.

主要な特徴

Wide opening simplifies aseptic or gloved filling

HDPE body offers broad compatibility with many aqueous samples

Linerless PP cap removes a potential loose-particle component

Uniform cylindrical wall resists splitting during routine handling

Flat stable base supports bench labeling and staging

お客様の製品に関する懸念事項

Sample integrity depends on material compatibility, clean closure surfaces and consistent identification. Cross-threaded caps, incompatible chemicals or unverified reuse can compromise the container.

Liquid may leak if the cap starts on the thread incorrectly.Start the closure squarely and apply a consistent closing procedure.

Residue on the neck land can interrupt the seal.Keep the sealing land dry and free of powder before capping.

Some solvents can permeate or stress HDPE over time.Check chemical compatibility and storage duration for the selected resin.

Reused bottles may retain traces from a previous sample.Use single-use bottles or a validated cleaning method for critical sampling.

典型的な用途

For collecting and holding water, process liquids, powders, granules, cleaning-validation samples and environmental-monitoring specimens in controlled production and laboratory areas.

技術的なパラメータ

The following ranges cover common HDPE clean sample bottles from small laboratory formats to one-liter containers. Final capacity, mouth size and packaging should match the sampling method.

コア材料	Natural high-density polyethylene bottle with polypropylene closure
パネルの厚さ	1.0-2.5 mm nominal bottle wall
有効幅	35-100 mm bottle diameter
最大長さ	250 mm overall height with closure
鋼鉄の厚さを直面する	0 mm; all-polymer container
コア密度	940-970 kg/m³ HDPE body
熱伝導率	0.42-0.52 W/(m·K), typical HDPE range
表面仕上げ	Smooth natural translucent bottle with white ribbed cap
ジョイントタイプ	Wide-mouth threaded neck with one-piece linerless PP screw closure
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

60-1000 mL nominal capacityWide-mouth or narrow-mouth neckNatural translucent or opaque light-protective bodyStandard, tamper-evident or tethered capSterile or non-sterile presentationIndividual, tray-packed or double-bagged supply

Planning a Cleanroom Sample Bottle specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する