English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
Cleanroom استنزاف خطي
Narrow stainless linear channel for collecting wash water along cleanroom walls, equipment lines or room thresholds.
- Continuously Welded Channel
- Built-In Drainage Fall
- Removable Hygienic Grating
- Configurable Outlet Positions
مقدمة المنتج
The cleanroom linear drain uses a continuously welded 304 or 316L stainless channel to collect wash water along an extended floor edge. A controlled internal fall directs liquid toward one or more outlets, while sectional removable grates expose the radiused channel for cleaning. Edge and flange profiles can be matched to resin, vinyl or tiled floor systems without leaving unnecessary exposed joints.
الخصائص الرئيسية
Sectional removable grates provide access to the complete channel interior.
Radiused stainless surfaces limit sharp internal residue traps.
Outlet quantity and position can be arranged around room drainage routes.
مخاوف المنتج للعملاء
Long wet boundaries require consistent floor collection without standing water, inaccessible channel sections or weak joints between drain modules.
A level channel can leave water standing at the end of a long wash-down run.A fabricated internal fall directs flow toward the selected outlet positions.
Fixed covers prevent complete inspection of long drain interiors.Lift-out sectional grates expose the full radiused channel for cleaning.
Numerous field joints can create leakage and residue-retention points.Factory-welded sections minimize joints, with flanged connections reserved for transport-length modules.
Floor finishes need different edge and waterproofing details.Resin, vinyl and tile flange profiles are available for the intended floor build-up.
تطبيقات نموذجية
Cleanroom wash baysProcess-skid perimetersFill-finish support roomsHygienic corridors and thresholds
المعلمات الفنية
Typical ranges for a hygienic stainless linear channel are listed below; run length, fall, grate and outlet layout are selected for flow and floor construction.
| المواد الأساسية | AISI 304 or 316L stainless steel channel |
|---|---|
| سمك اللوحة | 1.5-2.0 mm channel wall |
| العرض الفعال | 80-300 mm clear channel width |
| الحد الأقصى الطول | Up to 6000 mm per fabricated section |
| الصلب يواجه سمك | 1.5-2.0 mm exposed stainless surfaces |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless steel |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless steel |
| إنهاء السطح | Satin, pickled and passivated, or electropolished stainless steel |
| نوع المشترك | Continuously welded channel with optional flanged transport-section joints |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L gradeSlot or ladder grate500-6000 mm fabricated sectionsEnd, bottom or side outlets
Planning a Cleanroom Linear Drain specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
