İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Temiz Oda Lineer Drenaj
Narrow stainless linear channel for collecting wash water along cleanroom walls, equipment lines or room thresholds.
- Continuously Welded Channel
- Built-In Drainage Fall
- Removable Hygienic Grating
- Configurable Outlet Positions
Ürün tanıtımı
The cleanroom linear drain uses a continuously welded 304 or 316L stainless channel to collect wash water along an extended floor edge. A controlled internal fall directs liquid toward one or more outlets, while sectional removable grates expose the radiused channel for cleaning. Edge and flange profiles can be matched to resin, vinyl or tiled floor systems without leaving unnecessary exposed joints.
Ana Özellikler
Sectional removable grates provide access to the complete channel interior.
Radiused stainless surfaces limit sharp internal residue traps.
Outlet quantity and position can be arranged around room drainage routes.
Müşteri Ürün Sorunları
Long wet boundaries require consistent floor collection without standing water, inaccessible channel sections or weak joints between drain modules.
A level channel can leave water standing at the end of a long wash-down run.A fabricated internal fall directs flow toward the selected outlet positions.
Fixed covers prevent complete inspection of long drain interiors.Lift-out sectional grates expose the full radiused channel for cleaning.
Numerous field joints can create leakage and residue-retention points.Factory-welded sections minimize joints, with flanged connections reserved for transport-length modules.
Floor finishes need different edge and waterproofing details.Resin, vinyl and tile flange profiles are available for the intended floor build-up.
Tipik uygulamalar
Cleanroom wash baysProcess-skid perimetersFill-finish support roomsHygienic corridors and thresholds
Teknik parametreler
Typical ranges for a hygienic stainless linear channel are listed below; run length, fall, grate and outlet layout are selected for flow and floor construction.
| Temel malzemeler | AISI 304 or 316L stainless steel channel |
|---|---|
| Panel kalınlığı | 1.5-2.0 mm channel wall |
| Effective Width (Etkili Genişlik) | 80-300 mm clear channel width |
| Maksimum uzunluk | Up to 6000 mm per fabricated section |
| Çelik yüz yüze kalınlığı | 1.5-2.0 mm exposed stainless surfaces |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg/m³ for stainless steel |
| Termal İletkenlik | 14-16 W/(m·K) for stainless steel |
| Yüzey bitirme | Satin, pickled and passivated, or electropolished stainless steel |
| Ortak tip | Continuously welded channel with optional flanged transport-section joints |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
304 or 316L gradeSlot or ladder grate500-6000 mm fabricated sectionsEnd, bottom or side outlets
Planning a Cleanroom Linear Drain specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
