Complete stainless cleanroom linear drain in diagonal three-quarter view

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Saluran Linear Cleanroom

Narrow stainless linear channel for collecting wash water along cleanroom walls, equipment lines or room thresholds.

Continuously Welded Channel
Built-In Drainage Fall
Removable Hygienic Grating
Configurable Outlet Positions

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom linear drain uses a continuously welded 304 or 316L stainless channel to collect wash water along an extended floor edge. A controlled internal fall directs liquid toward one or more outlets, while sectional removable grates expose the radiused channel for cleaning. Edge and flange profiles can be matched to resin, vinyl or tiled floor systems without leaving unnecessary exposed joints.

Ciri-ciri Utama

A built-in longitudinal fall reduces ponding along extended runs.

Sectional removable grates provide access to the complete channel interior.

Radiused stainless surfaces limit sharp internal residue traps.

Outlet quantity and position can be arranged around room drainage routes.

Kebimbangan Produk Pelanggan

Long wet boundaries require consistent floor collection without standing water, inaccessible channel sections or weak joints between drain modules.

A level channel can leave water standing at the end of a long wash-down run.A fabricated internal fall directs flow toward the selected outlet positions.

Fixed covers prevent complete inspection of long drain interiors.Lift-out sectional grates expose the full radiused channel for cleaning.

Numerous field joints can create leakage and residue-retention points.Factory-welded sections minimize joints, with flanged connections reserved for transport-length modules.

Floor finishes need different edge and waterproofing details.Resin, vinyl and tile flange profiles are available for the intended floor build-up.

Permohonan yang biasa

Cleanroom wash baysProcess-skid perimetersFill-finish support roomsHygienic corridors and thresholds

Parameter teknikal

Typical ranges for a hygienic stainless linear channel are listed below; run length, fall, grate and outlet layout are selected for flow and floor construction.

Bahan Teras	AISI 304 or 316L stainless steel channel
Ketebalan Panel	1.5-2.0 mm channel wall
Lebar berkesan	80-300 mm clear channel width
Panjang maksimum	Up to 6000 mm per fabricated section
Keluli Menghadapi Ketebalan	1.5-2.0 mm exposed stainless surfaces
Ketumpatan teras	7900-8000 kg/m³ for stainless steel
Kekonduksian Terma	14-16 W/(m·K) for stainless steel
Kemasan permukaan	Satin, pickled and passivated, or electropolished stainless steel
Jenis Bersatu	Continuously welded channel with optional flanged transport-section joints
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304 or 316L gradeSlot or ladder grate500-6000 mm fabricated sectionsEnd, bottom or side outlets

Planning a Cleanroom Linear Drain specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami