English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Линейный дренаж чистого помещения
Narrow stainless linear channel for collecting wash water along cleanroom walls, equipment lines or room thresholds.
- Continuously Welded Channel
- Built-In Drainage Fall
- Removable Hygienic Grating
- Configurable Outlet Positions
Введение продукции
The cleanroom linear drain uses a continuously welded 304 or 316L stainless channel to collect wash water along an extended floor edge. A controlled internal fall directs liquid toward one or more outlets, while sectional removable grates expose the radiused channel for cleaning. Edge and flange profiles can be matched to resin, vinyl or tiled floor systems without leaving unnecessary exposed joints.
Основные характеристики
Sectional removable grates provide access to the complete channel interior.
Radiused stainless surfaces limit sharp internal residue traps.
Outlet quantity and position can be arranged around room drainage routes.
Обеспокоенность клиентов продуктами
Long wet boundaries require consistent floor collection without standing water, inaccessible channel sections or weak joints between drain modules.
A level channel can leave water standing at the end of a long wash-down run.A fabricated internal fall directs flow toward the selected outlet positions.
Fixed covers prevent complete inspection of long drain interiors.Lift-out sectional grates expose the full radiused channel for cleaning.
Numerous field joints can create leakage and residue-retention points.Factory-welded sections minimize joints, with flanged connections reserved for transport-length modules.
Floor finishes need different edge and waterproofing details.Resin, vinyl and tile flange profiles are available for the intended floor build-up.
Типичные приложения
Cleanroom wash baysProcess-skid perimetersFill-finish support roomsHygienic corridors and thresholds
Технические параметры
Typical ranges for a hygienic stainless linear channel are listed below; run length, fall, grate and outlet layout are selected for flow and floor construction.
| Основной материал | AISI 304 or 316L stainless steel channel |
|---|---|
| Толщина панели | 1.5-2.0 mm channel wall |
| эффективная ширина | 80-300 mm clear channel width |
| Максимальная длина | Up to 6000 mm per fabricated section |
| Толщина линий стали | 1,5 - 2,0 мм нержавеющие поверхности |
| Плотность ядра | 7900 - 8000 кг / м3 для нержавеющей стали |
| Теплопроводимость | 14 - 16 Вт / (м · К) для нержавеющей стали |
| Поверхностная отделка | Satin, pickled and passivated, or electropolished stainless steel |
| Объединенный тип | Continuously welded channel with optional flanged transport-section joints |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
304 or 316L gradeSlot or ladder grate500-6000 mm fabricated sectionsEnd, bottom or side outlets
Planning a Cleanroom Linear Drain specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
