موردك الموحد لمعدات الغرف النظيفة وأساسيات المرافق العقليةدعم المشاريع الدولية
Open mobile navigationClose mobile navigation
إضاءة الغرف النظيفة والمعدات الكهربائية

نظام الاتصال الداخلي للغرفة النظيفة

A networked hands-free communication system using flush sealed stations that remain operable through cleanroom gloves.
  • Sealed Membrane Stations
  • Hands-Free Full-Duplex Audio
  • PoE or Two-Wire Network
  • Remote Function Monitoring
طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The cleanroom intercom links wall stations in controlled rooms to operator desks, airlocks and external support areas. Each room station uses a closed membrane front over the microphone, loudspeaker and large function keys. Voice processing controls echo and background noise, while PoE, SIP or dedicated two-wire interfaces carry calls without an exposed handset inside the clean zone.

الخصائص الرئيسية

A continuous membrane face tolerates direct wiping around keys and audio openings.

Hands-free operation avoids handling a shared handset through gloves.

Noise and echo processing improves speech around fans and production equipment.

Programmable keys place direct calls to defined external stations.

Line and station monitoring can report communication faults centrally.

مخاوف المنتج للعملاء

Sealed rooms isolate personnel acoustically, but ordinary telephones and perforated speakers add difficult-to-clean touch surfaces.

Operators remove gloves to use a small telephone keypad.Large membrane keys and hands-free calling remain practical through cleanroom gloves.
Fan noise makes speech difficult to understand.Automatic gain, echo control and noise processing improve intelligibility.
Open speaker grilles trap residue inside the wall device.Audio passes through a sealed printed membrane rather than exposed perforations.
A failed station remains unnoticed until an urgent call.Central supervision monitors device and connection availability.

تطبيقات نموذجية

Aseptic processing roomsLaboratory communicationCleanroom airlocksSterile production support

المعلمات الفنية

Typical configurable construction ranges for a cleanroom intercom system are listed below.

المواد الأساسيةSUS304 face frame with sealed chemical-resistant membrane, microphone, loudspeaker, controller and recessed steel back box
سمك اللوحة2.0-4.0 mm sealed front assembly thickness
العرض الفعال150-320 mm station face width
الحد الأقصى الطولUp to 450 mm overall station height
الصلب يواجه سمك1.5-2.5 mm stainless face frame and back-box components
الكثافة الأساسيةApproximately 1200-1400 kg/m³ for the sealed engineering-polymer membrane assembly
الموصلية الحرارية0.20-0.35 W/(m·K) for the polymer front membrane
إنهاء السطحLight-grey or white sealed membrane in a fine-brushed stainless flush frame with colored key legends
نوع المشتركFlush gasketed wall frame with sealed membrane face and PoE, two-wire or SIP rear connection
التخصيصمتوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

IP/SIP or dedicated two-wire networkNumeric, direct-call or emergency keysVideo display stationDesk, surface or flush mounting

Planning a Cleanroom Intercom System specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا
E البريد الإلكتروني لنا WhatsApp WeChat

الرئيسية

المنتجات

الأخبار

من نحن

اتصل بنا