Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Système intercom Cleanroom
A networked hands-free communication system using flush sealed stations that remain operable through cleanroom gloves.
- Sealed Membrane Stations
- Hands-Free Full-Duplex Audio
- PoE or Two-Wire Network
- Remote Function Monitoring
Introduction de produit
The cleanroom intercom links wall stations in controlled rooms to operator desks, airlocks and external support areas. Each room station uses a closed membrane front over the microphone, loudspeaker and large function keys. Voice processing controls echo and background noise, while PoE, SIP or dedicated two-wire interfaces carry calls without an exposed handset inside the clean zone.
Key Features
Hands-free operation avoids handling a shared handset through gloves.
Noise and echo processing improves speech around fans and production equipment.
Programmable keys place direct calls to defined external stations.
Line and station monitoring can report communication faults centrally.
Préoccupations du client produit
Sealed rooms isolate personnel acoustically, but ordinary telephones and perforated speakers add difficult-to-clean touch surfaces.
Operators remove gloves to use a small telephone keypad.Large membrane keys and hands-free calling remain practical through cleanroom gloves.
Fan noise makes speech difficult to understand.Automatic gain, echo control and noise processing improve intelligibility.
Open speaker grilles trap residue inside the wall device.Audio passes through a sealed printed membrane rather than exposed perforations.
A failed station remains unnoticed until an urgent call.Central supervision monitors device and connection availability.
Les applications typiques
Aseptic processing roomsLaboratory communicationCleanroom airlocksSterile production support
Paramètres techniques
Typical configurable construction ranges for a cleanroom intercom system are listed below.
| Matériaux de base | SUS304 face frame with sealed chemical-resistant membrane, microphone, loudspeaker, controller and recessed steel back box |
|---|---|
| Panneau épaisseur | 2.0-4.0 mm sealed front assembly thickness |
| Largeur effective | 150-320 mm station face width |
| Longueur maximale | Up to 450 mm overall station height |
| Acier face épaisseur | 1.5-2.5 mm stainless face frame and back-box components |
| Densité Core | Approximately 1200-1400 kg/m³ for the sealed engineering-polymer membrane assembly |
| Conductivité thermique | 0.20-0.35 W/(m·K) for the polymer front membrane |
| surface finie | Light-grey or white sealed membrane in a fine-brushed stainless flush frame with colored key legends |
| Type joint | Flush gasketed wall frame with sealed membrane face and PoE, two-wire or SIP rear connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
IP/SIP or dedicated two-wire networkNumeric, direct-call or emergency keysVideo display stationDesk, surface or flush mounting
Planning a Cleanroom Intercom System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
