Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Sistema de intercomunicación de sala limpia
A networked hands-free communication system using flush sealed stations that remain operable through cleanroom gloves.
- Sealed Membrane Stations
- Hands-Free Full-Duplex Audio
- PoE or Two-Wire Network
- Remote Function Monitoring
Introducción del producto
The cleanroom intercom links wall stations in controlled rooms to operator desks, airlocks and external support areas. Each room station uses a closed membrane front over the microphone, loudspeaker and large function keys. Voice processing controls echo and background noise, while PoE, SIP or dedicated two-wire interfaces carry calls without an exposed handset inside the clean zone.
Características clave
Hands-free operation avoids handling a shared handset through gloves.
Noise and echo processing improves speech around fans and production equipment.
Programmable keys place direct calls to defined external stations.
Line and station monitoring can report communication faults centrally.
Preocupaciones del producto del cliente
Sealed rooms isolate personnel acoustically, but ordinary telephones and perforated speakers add difficult-to-clean touch surfaces.
Operators remove gloves to use a small telephone keypad.Large membrane keys and hands-free calling remain practical through cleanroom gloves.
Fan noise makes speech difficult to understand.Automatic gain, echo control and noise processing improve intelligibility.
Open speaker grilles trap residue inside the wall device.Audio passes through a sealed printed membrane rather than exposed perforations.
A failed station remains unnoticed until an urgent call.Central supervision monitors device and connection availability.
Aplicaciones típicas
Aseptic processing roomsLaboratory communicationCleanroom airlocksSterile production support
Parámetros técnicos
Typical configurable construction ranges for a cleanroom intercom system are listed below.
| Materiales Core | SUS304 face frame with sealed chemical-resistant membrane, microphone, loudspeaker, controller and recessed steel back box |
|---|---|
| Panel de espesor | 2.0-4.0 mm sealed front assembly thickness |
| Ancho efectivo | 150-320 mm station face width |
| Longitud máxima | Up to 450 mm overall station height |
| Acero frente a espesor | 1.5-2.5 mm stainless face frame and back-box components |
| Densidad Core | Approximately 1200-1400 kg/m³ for the sealed engineering-polymer membrane assembly |
| Conductividad térmica | 0.20-0.35 W/(m·K) for the polymer front membrane |
| Superficie acabada | Light-grey or white sealed membrane in a fine-brushed stainless flush frame with colored key legends |
| Tipo conjunto | Flush gasketed wall frame with sealed membrane face and PoE, two-wire or SIP rear connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
IP/SIP or dedicated two-wire networkNumeric, direct-call or emergency keysVideo display stationDesk, surface or flush mounting
Planning a Cleanroom Intercom System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
