แสงสว่างห้องสะอาดและอุปกรณ์ไฟฟ้า
ระบบอินเตอร์คอมห้องสะอาด
A networked hands-free communication system using flush sealed stations that remain operable through cleanroom gloves.
- Sealed Membrane Stations
- Hands-Free Full-Duplex Audio
- PoE or Two-Wire Network
- Remote Function Monitoring
การแนะนําสินค้า
The cleanroom intercom links wall stations in controlled rooms to operator desks, airlocks and external support areas. Each room station uses a closed membrane front over the microphone, loudspeaker and large function keys. Voice processing controls echo and background noise, while PoE, SIP or dedicated two-wire interfaces carry calls without an exposed handset inside the clean zone.
คุณสมบัติที่สําคัญ
Hands-free operation avoids handling a shared handset through gloves.
Noise and echo processing improves speech around fans and production equipment.
Programmable keys place direct calls to defined external stations.
Line and station monitoring can report communication faults centrally.
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
Sealed rooms isolate personnel acoustically, but ordinary telephones and perforated speakers add difficult-to-clean touch surfaces.
Operators remove gloves to use a small telephone keypad.Large membrane keys and hands-free calling remain practical through cleanroom gloves.
Fan noise makes speech difficult to understand.Automatic gain, echo control and noise processing improve intelligibility.
Open speaker grilles trap residue inside the wall device.Audio passes through a sealed printed membrane rather than exposed perforations.
A failed station remains unnoticed until an urgent call.Central supervision monitors device and connection availability.
การใช้งานทั่วไป
Aseptic processing roomsLaboratory communicationCleanroom airlocksSterile production support
พารามิเตอร์ทางเทคนิค
Typical configurable construction ranges for a cleanroom intercom system are listed below.
| วัสดุหลัก | SUS304 face frame with sealed chemical-resistant membrane, microphone, loudspeaker, controller and recessed steel back box |
|---|---|
| ความหนาของแผง | 2.0-4.0 mm sealed front assembly thickness |
| ความกว้างที่มีประสิทธิภาพ | 150-320 mm station face width |
| ความยาวสูงสุด | Up to 450 mm overall station height |
| ความหนาของเหล็กหันหน้า | 1.5-2.5 mm stainless face frame and back-box components |
| ความหนาแน่นหลัก | Approximately 1200-1400 kg/m³ for the sealed engineering-polymer membrane assembly |
| การนําความร้อน | 0.20-0.35 W/(m·K) for the polymer front membrane |
| เสร็จสิ้นพื้นผิว | Light-grey or white sealed membrane in a fine-brushed stainless flush frame with colored key legends |
| ประเภทร่วม | Flush gasketed wall frame with sealed membrane face and PoE, two-wire or SIP rear connection |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
IP/SIP or dedicated two-wire networkNumeric, direct-call or emergency keysVideo display stationDesk, surface or flush mounting
Planning a Cleanroom Intercom System specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม