English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
غرفة نظيفة غونينغ مرآة
A full-length safety-backed mirror in a sealed Type 304 stainless frame with rounded corners and concealed flush mounting for final clean-garment inspection.
- Full-length 1450 mm viewing field
- Safety-backed mirror glass
- Sealed rounded stainless frame
- Concealed flush wall mount
مقدمة المنتج
The cleanroom gowning mirror provides a 400 mm-wide full-length viewing field for checking coverall closures, hoods, masks, gloves and footwear before entry. Six-millimetre mirror glass is bonded to a continuous safety backing and captured inside a folded Type 304 stainless channel. Rounded frame corners and a sealed glass perimeter avoid projecting clips on the wipeable face. Rear keyhole brackets pull the 25 mm-deep assembly close to the wall while allowing controlled removal for replacement.
الخصائص الرئيسية
Continuous safety backing retains fractured glass against the support panel instead of leaving an unsupported mirror sheet.
A sealed stainless capture channel protects the glass edge and presents rounded wipeable corners.
Concealed keyhole brackets hold the mirror close to the wall without fastener heads across the viewing face.
مخاوف المنتج للعملاء
Gowning personnel need a full-body check without exposed glass edges, projecting clips or a deep frame that creates an inaccessible wall gap.
Small mirrors do not show open leg zips, loose boot covers or garment contact with the floor.The 1450 mm vertical viewing area supports a complete head-to-foot check.
Unbacked mirror glass can release loose pieces after accidental impact.A continuous adhesive safety backing retains the glass against its support panel.
Exposed edge clips and sharp corners catch wipes and collect residue.The folded stainless capture channel encloses all four edges with rounded welded corners.
A projecting frame leaves a deep, difficult-to-reach strip against the wall.Rear keyhole brackets pull the 25 mm assembly into a close flush-mounted position.
تطبيقات نموذجية
Final coverall inspection in personnel airlocksHood and mask fit checksCleanroom footwear verificationVisitor gowning stationsSterile-support change rooms
المعلمات الفنية
Typical configurable specifications for a full-length flush cleanroom gowning mirror are listed below.
| المواد الأساسية | 6 mm safety-backed mirror glass on a sealed Type 304 stainless support and capture frame |
|---|---|
| سمك اللوحة | 25 mm overall framed mirror depth |
| العرض الفعال | 400 mm clear full-length viewing width |
| الحد الأقصى الطول | 1450 mm maximum overall mirror height |
| الصلب يواجه سمك | 1.0 mm Type 304 stainless folded frame and rear support |
| الكثافة الأساسية | 2500 kg/m³ for mirror glass; 7900–8000 kg/m³ for stainless frame |
| الموصلية الحرارية | 0.8–1.0 W/(m·K) for mirror glass |
| إنهاء السطح | Clear silvered mirror face with neutral-cure perimeter seal and satin-brushed stainless frame |
| نوع المشترك | Bonded safety-backed glass captured in a welded rounded channel with concealed rear keyhole brackets |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
600 mm wider viewing fieldType 316 stainless frameElectropolished borderFloor-standing tilt frame
Planning a Cleanroom Gowning Mirror specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
