İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
Temiz Oda Gowning Ayna
A full-length safety-backed mirror in a sealed Type 304 stainless frame with rounded corners and concealed flush mounting for final clean-garment inspection.
- Full-length 1450 mm viewing field
- Safety-backed mirror glass
- Sealed rounded stainless frame
- Concealed flush wall mount
Ürün tanıtımı
The cleanroom gowning mirror provides a 400 mm-wide full-length viewing field for checking coverall closures, hoods, masks, gloves and footwear before entry. Six-millimetre mirror glass is bonded to a continuous safety backing and captured inside a folded Type 304 stainless channel. Rounded frame corners and a sealed glass perimeter avoid projecting clips on the wipeable face. Rear keyhole brackets pull the 25 mm-deep assembly close to the wall while allowing controlled removal for replacement.
Ana Özellikler
Continuous safety backing retains fractured glass against the support panel instead of leaving an unsupported mirror sheet.
A sealed stainless capture channel protects the glass edge and presents rounded wipeable corners.
Concealed keyhole brackets hold the mirror close to the wall without fastener heads across the viewing face.
Müşteri Ürün Sorunları
Gowning personnel need a full-body check without exposed glass edges, projecting clips or a deep frame that creates an inaccessible wall gap.
Small mirrors do not show open leg zips, loose boot covers or garment contact with the floor.The 1450 mm vertical viewing area supports a complete head-to-foot check.
Unbacked mirror glass can release loose pieces after accidental impact.A continuous adhesive safety backing retains the glass against its support panel.
Exposed edge clips and sharp corners catch wipes and collect residue.The folded stainless capture channel encloses all four edges with rounded welded corners.
A projecting frame leaves a deep, difficult-to-reach strip against the wall.Rear keyhole brackets pull the 25 mm assembly into a close flush-mounted position.
Tipik uygulamalar
Final coverall inspection in personnel airlocksHood and mask fit checksCleanroom footwear verificationVisitor gowning stationsSterile-support change rooms
Teknik parametreler
Typical configurable specifications for a full-length flush cleanroom gowning mirror are listed below.
| Temel malzemeler | 6 mm safety-backed mirror glass on a sealed Type 304 stainless support and capture frame |
|---|---|
| Panel kalınlığı | 25 mm overall framed mirror depth |
| Effective Width (Etkili Genişlik) | 400 mm clear full-length viewing width |
| Maksimum uzunluk | 1450 mm maximum overall mirror height |
| Çelik yüz yüze kalınlığı | 1.0 mm Type 304 stainless folded frame and rear support |
| Core Density (Çekirdek Yoğunluğu) | 2500 kg/m³ for mirror glass; 7900–8000 kg/m³ for stainless frame |
| Termal İletkenlik | 0.8–1.0 W/(m·K) for mirror glass |
| Yüzey bitirme | Clear silvered mirror face with neutral-cure perimeter seal and satin-brushed stainless frame |
| Ortak tip | Bonded safety-backed glass captured in a welded rounded channel with concealed rear keyhole brackets |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
600 mm wider viewing fieldType 316 stainless frameElectropolished borderFloor-standing tilt frame
Planning a Cleanroom Gowning Mirror specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
