Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Cleanroom Gowning miroir
A full-length safety-backed mirror in a sealed Type 304 stainless frame with rounded corners and concealed flush mounting for final clean-garment inspection.
- Full-length 1450 mm viewing field
- Safety-backed mirror glass
- Sealed rounded stainless frame
- Concealed flush wall mount
Introduction de produit
The cleanroom gowning mirror provides a 400 mm-wide full-length viewing field for checking coverall closures, hoods, masks, gloves and footwear before entry. Six-millimetre mirror glass is bonded to a continuous safety backing and captured inside a folded Type 304 stainless channel. Rounded frame corners and a sealed glass perimeter avoid projecting clips on the wipeable face. Rear keyhole brackets pull the 25 mm-deep assembly close to the wall while allowing controlled removal for replacement.
Key Features
Continuous safety backing retains fractured glass against the support panel instead of leaving an unsupported mirror sheet.
A sealed stainless capture channel protects the glass edge and presents rounded wipeable corners.
Concealed keyhole brackets hold the mirror close to the wall without fastener heads across the viewing face.
Préoccupations du client produit
Gowning personnel need a full-body check without exposed glass edges, projecting clips or a deep frame that creates an inaccessible wall gap.
Small mirrors do not show open leg zips, loose boot covers or garment contact with the floor.The 1450 mm vertical viewing area supports a complete head-to-foot check.
Unbacked mirror glass can release loose pieces after accidental impact.A continuous adhesive safety backing retains the glass against its support panel.
Exposed edge clips and sharp corners catch wipes and collect residue.The folded stainless capture channel encloses all four edges with rounded welded corners.
A projecting frame leaves a deep, difficult-to-reach strip against the wall.Rear keyhole brackets pull the 25 mm assembly into a close flush-mounted position.
Les applications typiques
Final coverall inspection in personnel airlocksHood and mask fit checksCleanroom footwear verificationVisitor gowning stationsSterile-support change rooms
Paramètres techniques
Typical configurable specifications for a full-length flush cleanroom gowning mirror are listed below.
| Matériaux de base | 6 mm safety-backed mirror glass on a sealed Type 304 stainless support and capture frame |
|---|---|
| Panneau épaisseur | 25 mm overall framed mirror depth |
| Largeur effective | 400 mm clear full-length viewing width |
| Longueur maximale | 1450 mm maximum overall mirror height |
| Acier face épaisseur | 1.0 mm Type 304 stainless folded frame and rear support |
| Densité Core | 2500 kg/m³ for mirror glass; 7900–8000 kg/m³ for stainless frame |
| Conductivité thermique | 0.8–1.0 W/(m·K) for mirror glass |
| surface finie | Clear silvered mirror face with neutral-cure perimeter seal and satin-brushed stainless frame |
| Type joint | Bonded safety-backed glass captured in a welded rounded channel with concealed rear keyhole brackets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
600 mm wider viewing fieldType 316 stainless frameElectropolished borderFloor-standing tilt frame
Planning a Cleanroom Gowning Mirror specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
