English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Зеркало для чистой комнаты
A full-length safety-backed mirror in a sealed Type 304 stainless frame with rounded corners and concealed flush mounting for final clean-garment inspection.
- Full-length 1450 mm viewing field
- Safety-backed mirror glass
- Sealed rounded stainless frame
- Concealed flush wall mount
Введение продукции
The cleanroom gowning mirror provides a 400 mm-wide full-length viewing field for checking coverall closures, hoods, masks, gloves and footwear before entry. Six-millimetre mirror glass is bonded to a continuous safety backing and captured inside a folded Type 304 stainless channel. Rounded frame corners and a sealed glass perimeter avoid projecting clips on the wipeable face. Rear keyhole brackets pull the 25 mm-deep assembly close to the wall while allowing controlled removal for replacement.
Основные характеристики
Continuous safety backing retains fractured glass against the support panel instead of leaving an unsupported mirror sheet.
A sealed stainless capture channel protects the glass edge and presents rounded wipeable corners.
Concealed keyhole brackets hold the mirror close to the wall without fastener heads across the viewing face.
Обеспокоенность клиентов продуктами
Gowning personnel need a full-body check without exposed glass edges, projecting clips or a deep frame that creates an inaccessible wall gap.
Small mirrors do not show open leg zips, loose boot covers or garment contact with the floor.The 1450 mm vertical viewing area supports a complete head-to-foot check.
Unbacked mirror glass can release loose pieces after accidental impact.A continuous adhesive safety backing retains the glass against its support panel.
Exposed edge clips and sharp corners catch wipes and collect residue.The folded stainless capture channel encloses all four edges with rounded welded corners.
A projecting frame leaves a deep, difficult-to-reach strip against the wall.Rear keyhole brackets pull the 25 mm assembly into a close flush-mounted position.
Типичные приложения
Final coverall inspection in personnel airlocksHood and mask fit checksCleanroom footwear verificationVisitor gowning stationsSterile-support change rooms
Технические параметры
Typical configurable specifications for a full-length flush cleanroom gowning mirror are listed below.
| Основной материал | 6 mm safety-backed mirror glass on a sealed Type 304 stainless support and capture frame |
|---|---|
| Толщина панели | 25 mm overall framed mirror depth |
| эффективная ширина | 400 mm clear full-length viewing width |
| Максимальная длина | 1450 mm maximum overall mirror height |
| Толщина линий стали | 1.0 mm Type 304 stainless folded frame and rear support |
| Плотность ядра | 2500 kg/m³ for mirror glass; 7900–8000 kg/m³ for stainless frame |
| Теплопроводимость | 0.8–1.0 W/(m·K) for mirror glass |
| Поверхностная отделка | Clear silvered mirror face with neutral-cure perimeter seal and satin-brushed stainless frame |
| Объединенный тип | Bonded safety-backed glass captured in a welded rounded channel with concealed rear keyhole brackets |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
600 mm wider viewing fieldType 316 stainless frameElectropolished borderFloor-standing tilt frame
Planning a Cleanroom Gowning Mirror specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
