English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
مولد الضباب الغرف النظيفة
A portable ultrasonic cleanroom fog generator producing adjustable high-purity water mist for airflow visualization and dynamic smoke studies.
- Residue-free high-purity water fog.
- Adjustable density and gentle outlet velocity.
- Cleanable stainless portable construction.
مقدمة المنتج
This fog generator converts DI, ultrapure or WFI water into a dense visible mist without combustion residue. A cleanable stainless reservoir, ultrasonic transducer array and variable output blower provide controllable fog density and discharge velocity. The flexible hose and interchangeable outlet wand direct fog beneath HEPA filters, around process equipment and across doorways for recorded airflow studies.
الخصائص الرئيسية
Adjustable fog density and outlet velocity protect delicate flow patterns.
Electropolished stainless housing and reservoir simplify cleaning.
Flexible hose positions the outlet away from the generator body.
Quick drain and level indication support controlled water handling.
Compact wheeled format moves easily through controlled areas.
مخاوف المنتج للعملاء
Airflow visualization requires a dense visible tracer that follows the actual air path without adding residue or momentum that could misrepresent the pattern.
Conventional smoke can leave residue in a controlled environment.Ultrasonic generation uses only suitable high-purity water to create the visible mist.
High discharge velocity can distort the airflow being observed.Independent density and outlet controls allow a gentle fog stream matched to the study.
The generator body cannot always be placed at the observation point.A flexible hose and outlet wand deliver fog beneath filters and around equipment.
Water-contact surfaces must be emptied and cleaned between studies.A drainable stainless reservoir and accessible level path support controlled drying and cleaning.
تطبيقات نموذجية
Cleanroom airflow visualizationDynamic smoke studiesUnidirectional-flow verificationDoorway and pressure-boundary studiesBiosafety cabinet and isolator airflow tracing
المعلمات الفنية
Representative portable water-fogger construction is listed below; reservoir size, hose length and outlet geometry can be matched to the visualization area.
| المواد الأساسية | Ultrasonic transducer array, 316L stainless reservoir, polymer hose and electronic controls |
|---|---|
| سمك اللوحة | Typically 1.0-1.5 mm for stainless enclosure panels |
| العرض الفعال | Approximately 150-250 mm across the portable generator body |
| الحد الأقصى الطول | Approximately 300-450 mm for body; discharge hose typically 1500-3000 mm |
| الصلب يواجه سمك | Typically 1.0-1.5 mm for 316L stainless enclosure and reservoir |
| الكثافة الأساسية | Approximately 7950-8000 kg/m³ for 316L stainless steel |
| الموصلية الحرارية | Approximately 14-16 W/(m·K) for 316L stainless steel |
| إنهاء السطح | Electropolished stainless body with graphite controls, clear level tube and white discharge hose |
| نوع المشترك | Sanitary reservoir closure with quick-connect fog hose and interchangeable outlet wand |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Compact or high-output capacityFlexible dispersion hoseStraight or curtain outlet wandBattery or mains powerFog illuminatorShock-resistant transport case
Planning a Cleanroom Fog Generator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
