Cleanroom fog generator in three-quarter full view with hose

클린룸 테스트 및 검증 장비

클린룸 안개 생성기

A portable ultrasonic cleanroom fog generator producing adjustable high-purity water mist for airflow visualization and dynamic smoke studies.

Residue-free high-purity water fog.
Adjustable density and gentle outlet velocity.
Cleanable stainless portable construction.

견적 요청 제품 찾아보기

상품 소개

This fog generator converts DI, ultrapure or WFI water into a dense visible mist without combustion residue. A cleanable stainless reservoir, ultrasonic transducer array and variable output blower provide controllable fog density and discharge velocity. The flexible hose and interchangeable outlet wand direct fog beneath HEPA filters, around process equipment and across doorways for recorded airflow studies.

주요 기능

Water-only ultrasonic generation avoids oil-based smoke residue.

Adjustable fog density and outlet velocity protect delicate flow patterns.

Electropolished stainless housing and reservoir simplify cleaning.

Flexible hose positions the outlet away from the generator body.

Quick drain and level indication support controlled water handling.

Compact wheeled format moves easily through controlled areas.

고객 제품 관심사

Airflow visualization requires a dense visible tracer that follows the actual air path without adding residue or momentum that could misrepresent the pattern.

Conventional smoke can leave residue in a controlled environment.Ultrasonic generation uses only suitable high-purity water to create the visible mist.

High discharge velocity can distort the airflow being observed.Independent density and outlet controls allow a gentle fog stream matched to the study.

The generator body cannot always be placed at the observation point.A flexible hose and outlet wand deliver fog beneath filters and around equipment.

Water-contact surfaces must be emptied and cleaned between studies.A drainable stainless reservoir and accessible level path support controlled drying and cleaning.

일반적인 응용 프로그램

Cleanroom airflow visualizationDynamic smoke studiesUnidirectional-flow verificationDoorway and pressure-boundary studiesBiosafety cabinet and isolator airflow tracing

기술 매개변수

Representative portable water-fogger construction is listed below; reservoir size, hose length and outlet geometry can be matched to the visualization area.

핵심 재료	Ultrasonic transducer array, 316L stainless reservoir, polymer hose and electronic controls
패널 두께	Typically 1.0-1.5 mm for stainless enclosure panels
유효 폭	Approximately 150-250 mm across the portable generator body
최대 길이	Approximately 300-450 mm for body; discharge hose typically 1500-3000 mm
강철 면면 두께	Typically 1.0-1.5 mm for 316L stainless enclosure and reservoir
코어 밀도	Approximately 7950-8000 kg/m³ for 316L stainless steel
열전도도 (Thermal Conductivity)	316 L 스테인레스 스틸의 약 14 - 16 W / (m · K)
표면 마무리	Electropolished stainless body with graphite controls, clear level tube and white discharge hose
접합 유형	Sanitary reservoir closure with quick-connect fog hose and interchangeable outlet wand
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Compact or high-output capacityFlexible dispersion hoseStraight or curtain outlet wandBattery or mains powerFog illuminatorShock-resistant transport case

Planning a Cleanroom Fog Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.