Cleanroom fog generator in three-quarter full view with hose

Instrumen Ujian dan Pengesahan Bilik Bersih

Penjana kabut bilik bersih

A portable ultrasonic cleanroom fog generator producing adjustable high-purity water mist for airflow visualization and dynamic smoke studies.

Residue-free high-purity water fog.
Adjustable density and gentle outlet velocity.
Cleanable stainless portable construction.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This fog generator converts DI, ultrapure or WFI water into a dense visible mist without combustion residue. A cleanable stainless reservoir, ultrasonic transducer array and variable output blower provide controllable fog density and discharge velocity. The flexible hose and interchangeable outlet wand direct fog beneath HEPA filters, around process equipment and across doorways for recorded airflow studies.

Ciri-ciri Utama

Water-only ultrasonic generation avoids oil-based smoke residue.

Adjustable fog density and outlet velocity protect delicate flow patterns.

Electropolished stainless housing and reservoir simplify cleaning.

Flexible hose positions the outlet away from the generator body.

Quick drain and level indication support controlled water handling.

Compact wheeled format moves easily through controlled areas.

Kebimbangan Produk Pelanggan

Airflow visualization requires a dense visible tracer that follows the actual air path without adding residue or momentum that could misrepresent the pattern.

Conventional smoke can leave residue in a controlled environment.Ultrasonic generation uses only suitable high-purity water to create the visible mist.

High discharge velocity can distort the airflow being observed.Independent density and outlet controls allow a gentle fog stream matched to the study.

The generator body cannot always be placed at the observation point.A flexible hose and outlet wand deliver fog beneath filters and around equipment.

Water-contact surfaces must be emptied and cleaned between studies.A drainable stainless reservoir and accessible level path support controlled drying and cleaning.

Permohonan yang biasa

Cleanroom airflow visualizationDynamic smoke studiesUnidirectional-flow verificationDoorway and pressure-boundary studiesBiosafety cabinet and isolator airflow tracing

Parameter teknikal

Representative portable water-fogger construction is listed below; reservoir size, hose length and outlet geometry can be matched to the visualization area.

Bahan Teras	Ultrasonic transducer array, 316L stainless reservoir, polymer hose and electronic controls
Ketebalan Panel	Typically 1.0-1.5 mm for stainless enclosure panels
Lebar berkesan	Approximately 150-250 mm across the portable generator body
Panjang maksimum	Approximately 300-450 mm for body; discharge hose typically 1500-3000 mm
Keluli Menghadapi Ketebalan	Typically 1.0-1.5 mm for 316L stainless enclosure and reservoir
Ketumpatan teras	Kira-kira 7950-8000 kg / m3 untuk keluli tahan karat 316L
Kekonduksian Terma	Kira-kira 14-16 W / (m · K) untuk keluli tahan karat 316L
Kemasan permukaan	Electropolished stainless body with graphite controls, clear level tube and white discharge hose
Jenis Bersatu	Sanitary reservoir closure with quick-connect fog hose and interchangeable outlet wand
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Compact or high-output capacityFlexible dispersion hoseStraight or curtain outlet wandBattery or mains powerFog illuminatorShock-resistant transport case

Planning a Cleanroom Fog Generator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami