English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Приборы для испытаний и валидации в чистых помещениях
Генератор тумана в чистой комнате
A portable ultrasonic cleanroom fog generator producing adjustable high-purity water mist for airflow visualization and dynamic smoke studies.
- Residue-free high-purity water fog.
- Adjustable density and gentle outlet velocity.
- Cleanable stainless portable construction.
Введение продукции
This fog generator converts DI, ultrapure or WFI water into a dense visible mist without combustion residue. A cleanable stainless reservoir, ultrasonic transducer array and variable output blower provide controllable fog density and discharge velocity. The flexible hose and interchangeable outlet wand direct fog beneath HEPA filters, around process equipment and across doorways for recorded airflow studies.
Основные характеристики
Adjustable fog density and outlet velocity protect delicate flow patterns.
Electropolished stainless housing and reservoir simplify cleaning.
Flexible hose positions the outlet away from the generator body.
Quick drain and level indication support controlled water handling.
Compact wheeled format moves easily through controlled areas.
Обеспокоенность клиентов продуктами
Airflow visualization requires a dense visible tracer that follows the actual air path without adding residue or momentum that could misrepresent the pattern.
Conventional smoke can leave residue in a controlled environment.Ultrasonic generation uses only suitable high-purity water to create the visible mist.
High discharge velocity can distort the airflow being observed.Independent density and outlet controls allow a gentle fog stream matched to the study.
The generator body cannot always be placed at the observation point.A flexible hose and outlet wand deliver fog beneath filters and around equipment.
Water-contact surfaces must be emptied and cleaned between studies.A drainable stainless reservoir and accessible level path support controlled drying and cleaning.
Типичные приложения
Cleanroom airflow visualizationDynamic smoke studiesUnidirectional-flow verificationDoorway and pressure-boundary studiesBiosafety cabinet and isolator airflow tracing
Технические параметры
Representative portable water-fogger construction is listed below; reservoir size, hose length and outlet geometry can be matched to the visualization area.
| Основной материал | Ultrasonic transducer array, 316L stainless reservoir, polymer hose and electronic controls |
|---|---|
| Толщина панели | Typically 1.0-1.5 mm for stainless enclosure panels |
| эффективная ширина | Approximately 150-250 mm across the portable generator body |
| Максимальная длина | Approximately 300-450 mm for body; discharge hose typically 1500-3000 mm |
| Толщина линий стали | Typically 1.0-1.5 mm for 316L stainless enclosure and reservoir |
| Плотность ядра | Approximately 7950-8000 kg/m³ for 316L stainless steel |
| Теплопроводимость | Approximately 14-16 W/(m·K) for 316L stainless steel |
| Поверхностная отделка | Electropolished stainless body with graphite controls, clear level tube and white discharge hose |
| Объединенный тип | Sanitary reservoir closure with quick-connect fog hose and interchangeable outlet wand |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Compact or high-output capacityFlexible dispersion hoseStraight or curtain outlet wandBattery or mains powerFog illuminatorShock-resistant transport case
Planning a Cleanroom Fog Generator specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
