English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
لوحة منفذ بيانات الغرفة النظيفة
A flush stainless network plate that organizes sealed copper and fiber connections at the cleanroom wall while protecting unused ports.
- Sealed RJ45 and Fiber Modules
- Flush Stainless Faceplate
- Retained Dust Caps
- Permanent Port Identification
مقدمة المنتج
The data outlet panel groups industrial RJ45, fiber, USB or other low-voltage interfaces on one cleanroom plate. Each bulkhead adapter seals to the panel and connects to fixed cabling in the rear box, avoiding loose patch leads through an open wall penetration. Retained caps close unused ports, and engraved labels map each connector to the network or equipment endpoint.
الخصائص الرئيسية
Retained caps protect unused connector faces during cleaning.
Engraved port numbers remain legible after repeated disinfectant wiping.
The stainless plate closes the wall opening with one concealed gasket.
Rear cable management preserves bend radius and strain relief for copper and fiber.
مخاوف المنتج للعملاء
Data access must remain flexible without leaving open ports, unlabeled cables or an unsealed path into the wall cavity.
Loose network cables pass directly through a drilled wall hole.Bulkhead couplers terminate permanent cabling at a sealed plate.
Unused RJ45 and fiber ports fill with dust or cleaning mist.Tethered caps close each unoccupied connector.
Patch leads are connected to the wrong network segment.Permanent port numbers and color coding identify each service.
Tight rear bends damage fiber at a shallow back box.A deeper cable-management zone controls bend radius and strain relief.
تطبيقات نموذجية
Cleanroom equipment networkingLaboratory data connectionsMonitoring system portsTemporary validation instruments
المعلمات الفنية
Typical configurable construction ranges for a cleanroom data outlet panel are listed below.
| المواد الأساسية | SUS304/SUS316L faceplate with industrial RJ45, fiber or USB bulkhead adapters and enclosed rear cable box |
|---|---|
| سمك اللوحة | 1.5-3.0 mm stainless faceplate thickness |
| العرض الفعال | 120-400 mm data panel width |
| الحد الأقصى الطول | Up to 500 mm overall panel height |
| الصلب يواجه سمك | 1.5-3.0 mm cleanroom-facing stainless plate |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for the stainless plate material |
| الموصلية الحرارية | 14-16 W/(m·K) for the stainless faceplate |
| إنهاء السطح | Fine-brushed stainless with black or blue connector modules, colored port IDs and tethered caps |
| نوع المشترك | Flush gasketed plate with individually sealed bulkhead adapters and strain-relieved rear cable enclosure |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Copper RJ45, fiber, USB or mixed interfacesSingle or multi-port layoutTethered sealing capsColor and laser port identification
Planning a Cleanroom Data Outlet Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
