Cleanroom data outlet panel with stainless face and colored sealed network ports

클린룸 조명 및 전기 장비

클린룸 데이터 출력 패널

A flush stainless network plate that organizes sealed copper and fiber connections at the cleanroom wall while protecting unused ports.

Sealed RJ45 and Fiber Modules
Flush Stainless Faceplate
Retained Dust Caps
Permanent Port Identification

견적 요청 제품 찾아보기

상품 소개

The data outlet panel groups industrial RJ45, fiber, USB or other low-voltage interfaces on one cleanroom plate. Each bulkhead adapter seals to the panel and connects to fixed cabling in the rear box, avoiding loose patch leads through an open wall penetration. Retained caps close unused ports, and engraved labels map each connector to the network or equipment endpoint.

주요 기능

Bulkhead adapters isolate room patch leads from permanent in-wall cable.

Retained caps protect unused connector faces during cleaning.

Engraved port numbers remain legible after repeated disinfectant wiping.

The stainless plate closes the wall opening with one concealed gasket.

Rear cable management preserves bend radius and strain relief for copper and fiber.

고객 제품 관심사

Data access must remain flexible without leaving open ports, unlabeled cables or an unsealed path into the wall cavity.

Loose network cables pass directly through a drilled wall hole.Bulkhead couplers terminate permanent cabling at a sealed plate.

Unused RJ45 and fiber ports fill with dust or cleaning mist.Tethered caps close each unoccupied connector.

Patch leads are connected to the wrong network segment.Permanent port numbers and color coding identify each service.

Tight rear bends damage fiber at a shallow back box.A deeper cable-management zone controls bend radius and strain relief.

일반적인 응용 프로그램

Cleanroom equipment networkingLaboratory data connectionsMonitoring system portsTemporary validation instruments

기술 매개변수

Typical configurable construction ranges for a cleanroom data outlet panel are listed below.

핵심 재료	SUS304/SUS316L faceplate with industrial RJ45, fiber or USB bulkhead adapters and enclosed rear cable box
패널 두께	1.5-3.0 mm stainless faceplate thickness
유효 폭	120-400 mm data panel width
최대 길이	Up to 500 mm overall panel height
강철 면면 두께	1.5-3.0 mm cleanroom-facing stainless plate
코어 밀도	Approximately 7900-8000 kg/m³ for the stainless plate material
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless faceplate
표면 마무리	Fine-brushed stainless with black or blue connector modules, colored port IDs and tethered caps
접합 유형	Flush gasketed plate with individually sealed bulkhead adapters and strain-relieved rear cable enclosure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Copper RJ45, fiber, USB or mixed interfacesSingle or multi-port layoutTethered sealing capsColor and laser port identification

Planning a Cleanroom Data Outlet Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.