Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Panel de salida de datos de sala limpia
A flush stainless network plate that organizes sealed copper and fiber connections at the cleanroom wall while protecting unused ports.
- Sealed RJ45 and Fiber Modules
- Flush Stainless Faceplate
- Retained Dust Caps
- Permanent Port Identification
Introducción del producto
The data outlet panel groups industrial RJ45, fiber, USB or other low-voltage interfaces on one cleanroom plate. Each bulkhead adapter seals to the panel and connects to fixed cabling in the rear box, avoiding loose patch leads through an open wall penetration. Retained caps close unused ports, and engraved labels map each connector to the network or equipment endpoint.
Características clave
Retained caps protect unused connector faces during cleaning.
Engraved port numbers remain legible after repeated disinfectant wiping.
The stainless plate closes the wall opening with one concealed gasket.
Rear cable management preserves bend radius and strain relief for copper and fiber.
Preocupaciones del producto del cliente
Data access must remain flexible without leaving open ports, unlabeled cables or an unsealed path into the wall cavity.
Loose network cables pass directly through a drilled wall hole.Bulkhead couplers terminate permanent cabling at a sealed plate.
Unused RJ45 and fiber ports fill with dust or cleaning mist.Tethered caps close each unoccupied connector.
Patch leads are connected to the wrong network segment.Permanent port numbers and color coding identify each service.
Tight rear bends damage fiber at a shallow back box.A deeper cable-management zone controls bend radius and strain relief.
Aplicaciones típicas
Cleanroom equipment networkingLaboratory data connectionsMonitoring system portsTemporary validation instruments
Parámetros técnicos
Typical configurable construction ranges for a cleanroom data outlet panel are listed below.
| Materiales Core | SUS304/SUS316L faceplate with industrial RJ45, fiber or USB bulkhead adapters and enclosed rear cable box |
|---|---|
| Panel de espesor | 1.5-3.0 mm stainless faceplate thickness |
| Ancho efectivo | 120-400 mm data panel width |
| Longitud máxima | Up to 500 mm overall panel height |
| Acero frente a espesor | 1.5-3.0 mm cleanroom-facing stainless plate |
| Densidad Core | Approximately 7900-8000 kg/m³ for the stainless plate material |
| Conductividad térmica | 14-16 W/(m·K) for the stainless faceplate |
| Superficie acabada | Fine-brushed stainless with black or blue connector modules, colored port IDs and tethered caps |
| Tipo conjunto | Flush gasketed plate with individually sealed bulkhead adapters and strain-relieved rear cable enclosure |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Copper RJ45, fiber, USB or mixed interfacesSingle or multi-port layoutTethered sealing capsColor and laser port identification
Planning a Cleanroom Data Outlet Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
