Cleanroom data outlet panel with stainless face and colored sealed network ports

クリーンルーム照明 · 電気機器

クリーンルームデータ出口パネル

A flush stainless network plate that organizes sealed copper and fiber connections at the cleanroom wall while protecting unused ports.

Sealed RJ45 and Fiber Modules
Flush Stainless Faceplate
Retained Dust Caps
Permanent Port Identification

見積もりリクエスト製品案内

商品紹介

The data outlet panel groups industrial RJ45, fiber, USB or other low-voltage interfaces on one cleanroom plate. Each bulkhead adapter seals to the panel and connects to fixed cabling in the rear box, avoiding loose patch leads through an open wall penetration. Retained caps close unused ports, and engraved labels map each connector to the network or equipment endpoint.

主要な特徴

Bulkhead adapters isolate room patch leads from permanent in-wall cable.

Retained caps protect unused connector faces during cleaning.

Engraved port numbers remain legible after repeated disinfectant wiping.

The stainless plate closes the wall opening with one concealed gasket.

Rear cable management preserves bend radius and strain relief for copper and fiber.

お客様の製品に関する懸念事項

Data access must remain flexible without leaving open ports, unlabeled cables or an unsealed path into the wall cavity.

Loose network cables pass directly through a drilled wall hole.Bulkhead couplers terminate permanent cabling at a sealed plate.

Unused RJ45 and fiber ports fill with dust or cleaning mist.Tethered caps close each unoccupied connector.

Patch leads are connected to the wrong network segment.Permanent port numbers and color coding identify each service.

Tight rear bends damage fiber at a shallow back box.A deeper cable-management zone controls bend radius and strain relief.

典型的な用途

Cleanroom equipment networkingLaboratory data connectionsMonitoring system portsTemporary validation instruments

技術的なパラメータ

Typical configurable construction ranges for a cleanroom data outlet panel are listed below.

コア材料	SUS304/SUS316L faceplate with industrial RJ45, fiber or USB bulkhead adapters and enclosed rear cable box
パネルの厚さ	1.5-3.0 mm stainless faceplate thickness
有効幅	120-400 mm data panel width
最大長さ	Up to 500 mm overall panel height
鋼鉄の厚さを直面する	1.5-3.0 mm cleanroom-facing stainless plate
コア密度	Approximately 7900-8000 kg/m³ for the stainless plate material
熱伝導率	14-16 W/(m·K) for the stainless faceplate
表面仕上げ	Fine-brushed stainless with black or blue connector modules, colored port IDs and tethered caps
ジョイントタイプ	Flush gasketed plate with individually sealed bulkhead adapters and strain-relieved rear cable enclosure
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Copper RJ45, fiber, USB or mixed interfacesSingle or multi-port layoutTethered sealing capsColor and laser port identification

Planning a Cleanroom Data Outlet Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する