English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Aseptic محطة عمل تدفق رقمي
A cleanable open workstation that delivers unidirectional HEPA-filtered downflow over critical preparation steps performed inside a suitable cleanroom.
- Critical-Zone First Air
- Radiused Stainless Interior
- Low-Turbulence Downflow
- Integrated Process Utilities
مقدمة المنتج
The aseptic workstation is arranged so filtered first air reaches the critical handling zone before passing over non-critical items. A stainless liner with radiused corners, flush utilities and a removable work tray supports repeated cleaning. The front opening is kept as small as the process allows, and the downflow diffuser is coordinated with equipment placement to avoid airflow shadows. As an open laminar-flow device, it depends on a suitable cleanroom environment and controlled aseptic practices.
الخصائص الرئيسية
Flush utilities reduce turbulence and cleaning obstructions around the work zone.
Radiused stainless corners eliminate sharp internal ledges.
A removable tray exposes the lower pan after liquid or component handling.
Airflow and sash alarms can warn when the selected operating condition is disturbed.
مخاوف المنتج للعملاء
Open aseptic preparation requires disciplined first-air placement and cleanable geometry because the operator remains part of the surrounding environment.
Hands and supplies block first air from critical surfaces.The wide ceiling diffuser and organized rear utility zone support a clear critical path.
Utility fittings create ledges around the work area.Flush-mounted service panels keep valves and outlets close to the liner plane.
Spilled liquid reaches hidden cabinet seams.A welded lower pan and removable tray expose affected surfaces for cleaning.
An open workstation is treated like a sealed isolator.Application guidance states its dependence on the surrounding cleanroom and aseptic procedure.
تطبيقات نموذجية
Aseptic component preparationOpen sterile connection setupSmall-batch filling supportCritical clean assembly inside controlled rooms
المعلمات الفنية
Typical configurable construction ranges for an aseptic laminar flow workstation are listed below.
| المواد الأساسية | SUS316L critical work-zone liner with powder-coated or stainless double-skin fan enclosure |
|---|---|
| سمك اللوحة | 30-50 mm double-skin plenum and side sections |
| العرض الفعال | 900-1800 mm clear aseptic working width |
| الحد الأقصى الطول | Up to 2200 mm overall workstation height |
| الصلب يواجه سمك | 1.2-1.5 mm SUS316L work-zone liner; 1.0-1.2 mm outer skins |
| الكثافة الأساسية | Approximately 8000 kg/m³ for SUS316L work-zone components |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished or fine-brushed SUS316L with welded radiused corners |
| نوع المشترك | Continuously welded inner liner with flush utility plates and gasketed HEPA filter frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
SUS304 or SUS316L work zoneMotorized sashIntegrated particle sampling portsProcess gas and vacuum utilities
Planning a Aseptic Laminar Flow Workstation specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
