Aseptic laminar flow workstation with radiused stainless work zone

層流 · 封じ込め装置

Aseptic 層流ワークステーション

A cleanable open workstation that delivers unidirectional HEPA-filtered downflow over critical preparation steps performed inside a suitable cleanroom.

Critical-Zone First Air
Radiused Stainless Interior
低乱流ダウンフロー
Integrated Process Utilities

見積もりリクエスト製品案内

商品紹介

The aseptic workstation is arranged so filtered first air reaches the critical handling zone before passing over non-critical items. A stainless liner with radiused corners, flush utilities and a removable work tray supports repeated cleaning. The front opening is kept as small as the process allows, and the downflow diffuser is coordinated with equipment placement to avoid airflow shadows. As an open laminar-flow device, it depends on a suitable cleanroom environment and controlled aseptic practices.

主要な特徴

The work layout preserves first-air exposure over the most critical open handling points.

Flush utilities reduce turbulence and cleaning obstructions around the work zone.

Radiused stainless corners eliminate sharp internal ledges.

A removable tray exposes the lower pan after liquid or component handling.

Airflow and sash alarms can warn when the selected operating condition is disturbed.

お客様の製品に関する懸念事項

Open aseptic preparation requires disciplined first-air placement and cleanable geometry because the operator remains part of the surrounding environment.

Hands and supplies block first air from critical surfaces.The wide ceiling diffuser and organized rear utility zone support a clear critical path.

Utility fittings create ledges around the work area.Flush-mounted service panels keep valves and outlets close to the liner plane.

Spilled liquid reaches hidden cabinet seams.A welded lower pan and removable tray expose affected surfaces for cleaning.

An open workstation is treated like a sealed isolator.Application guidance states its dependence on the surrounding cleanroom and aseptic procedure.

典型的な用途

Aseptic component preparationOpen sterile connection setupSmall-batch filling supportCritical clean assembly inside controlled rooms

技術的なパラメータ

Typical configurable construction ranges for an aseptic laminar flow workstation are listed below.

コア材料	SUS316L critical work-zone liner with powder-coated or stainless double-skin fan enclosure
パネルの厚さ	30-50 mm double-skin plenum and side sections
有効幅	900-1800 mm clear aseptic working width
最大長さ	Up to 2200 mm overall workstation height
鋼鉄の厚さを直面する	1.2-1.5 mm SUS316L work-zone liner; 1.0-1.2 mm outer skins
コア密度	Approximately 8000 kg/m³ for SUS316L work-zone components
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Electropolished or fine-brushed SUS316L with welded radiused corners
ジョイントタイプ	Continuously welded inner liner with flush utility plates and gasketed HEPA filter frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

SUS304 or SUS316L work zoneモーター付きサッシュIntegrated particle sampling portsProcess gas and vacuum utilities

Planning a Aseptic Laminar Flow Workstation specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する