Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Estación de trabajo de flujo laminar aséptico
A cleanable open workstation that delivers unidirectional HEPA-filtered downflow over critical preparation steps performed inside a suitable cleanroom.
- Critical-Zone First Air
- Radiused Stainless Interior
- Low-Turbulence Downflow
- Integrated Process Utilities
Introducción del producto
The aseptic workstation is arranged so filtered first air reaches the critical handling zone before passing over non-critical items. A stainless liner with radiused corners, flush utilities and a removable work tray supports repeated cleaning. The front opening is kept as small as the process allows, and the downflow diffuser is coordinated with equipment placement to avoid airflow shadows. As an open laminar-flow device, it depends on a suitable cleanroom environment and controlled aseptic practices.
Características clave
Flush utilities reduce turbulence and cleaning obstructions around the work zone.
Radiused stainless corners eliminate sharp internal ledges.
A removable tray exposes the lower pan after liquid or component handling.
Airflow and sash alarms can warn when the selected operating condition is disturbed.
Preocupaciones del producto del cliente
Open aseptic preparation requires disciplined first-air placement and cleanable geometry because the operator remains part of the surrounding environment.
Hands and supplies block first air from critical surfaces.The wide ceiling diffuser and organized rear utility zone support a clear critical path.
Utility fittings create ledges around the work area.Flush-mounted service panels keep valves and outlets close to the liner plane.
Spilled liquid reaches hidden cabinet seams.A welded lower pan and removable tray expose affected surfaces for cleaning.
An open workstation is treated like a sealed isolator.Application guidance states its dependence on the surrounding cleanroom and aseptic procedure.
Aplicaciones típicas
Aseptic component preparationOpen sterile connection setupSmall-batch filling supportCritical clean assembly inside controlled rooms
Parámetros técnicos
Typical configurable construction ranges for an aseptic laminar flow workstation are listed below.
| Materiales Core | SUS316L critical work-zone liner with powder-coated or stainless double-skin fan enclosure |
|---|---|
| Panel de espesor | 30-50 mm double-skin plenum and side sections |
| Ancho efectivo | 900-1800 mm clear aseptic working width |
| Longitud máxima | Up to 2200 mm overall workstation height |
| Acero frente a espesor | 1.2-1.5 mm SUS316L work-zone liner; 1.0-1.2 mm outer skins |
| Densidad Core | Approximately 8000 kg/m³ for SUS316L work-zone components |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Electropolished or fine-brushed SUS316L with welded radiused corners |
| Tipo conjunto | Continuously welded inner liner with flush utility plates and gasketed HEPA filter frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
SUS304 or SUS316L work zoneMotorized sashIntegrated particle sampling portsProcess gas and vacuum utilities
Planning a Aseptic Laminar Flow Workstation specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
