Aseptic laminar flow workstation with radiused stainless work zone

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

무균 계층 흐름 워크스테이션

A cleanable open workstation that delivers unidirectional HEPA-filtered downflow over critical preparation steps performed inside a suitable cleanroom.

Critical-Zone First Air
Radiused Stainless Interior
낮은 난류 하류 (Low Turbulence Downflow)
Integrated Process Utilities

견적 요청 제품 찾아보기

상품 소개

The aseptic workstation is arranged so filtered first air reaches the critical handling zone before passing over non-critical items. A stainless liner with radiused corners, flush utilities and a removable work tray supports repeated cleaning. The front opening is kept as small as the process allows, and the downflow diffuser is coordinated with equipment placement to avoid airflow shadows. As an open laminar-flow device, it depends on a suitable cleanroom environment and controlled aseptic practices.

주요 기능

The work layout preserves first-air exposure over the most critical open handling points.

Flush utilities reduce turbulence and cleaning obstructions around the work zone.

Radiused stainless corners eliminate sharp internal ledges.

A removable tray exposes the lower pan after liquid or component handling.

Airflow and sash alarms can warn when the selected operating condition is disturbed.

고객 제품 관심사

Open aseptic preparation requires disciplined first-air placement and cleanable geometry because the operator remains part of the surrounding environment.

Hands and supplies block first air from critical surfaces.The wide ceiling diffuser and organized rear utility zone support a clear critical path.

Utility fittings create ledges around the work area.Flush-mounted service panels keep valves and outlets close to the liner plane.

Spilled liquid reaches hidden cabinet seams.A welded lower pan and removable tray expose affected surfaces for cleaning.

An open workstation is treated like a sealed isolator.Application guidance states its dependence on the surrounding cleanroom and aseptic procedure.

일반적인 응용 프로그램

Aseptic component preparationOpen sterile connection setupSmall-batch filling supportCritical clean assembly inside controlled rooms

기술 매개변수

Typical configurable construction ranges for an aseptic laminar flow workstation are listed below.

핵심 재료	SUS316L critical work-zone liner with powder-coated or stainless double-skin fan enclosure
패널 두께	30-50 mm double-skin plenum and side sections
유효 폭	900-1800 mm clear aseptic working width
최대 길이	Up to 2200 mm overall workstation height
강철 면면 두께	1.2-1.5 mm SUS316L work-zone liner; 1.0-1.2 mm outer skins
코어 밀도	Approximately 8000 kg/m³ for SUS316L work-zone components
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished or fine-brushed SUS316L with welded radiused corners
접합 유형	Continuously welded inner liner with flush utility plates and gasketed HEPA filter frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SUS304 or SUS316L work zone모터식 가죽Integrated particle sampling portsProcess gas and vacuum utilities

Planning a Aseptic Laminar Flow Workstation specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.