English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
A نظام التصور تدفق الهواء
An integrated cleanroom smoke-study platform combining controllable tracer generation, distribution, illumination and synchronized video capture.
- Integrated smoke-study workflow.
- Multi-outlet controlled fog delivery.
- Coordinated illumination and capture.
مقدمة المنتج
This modular system coordinates a high-purity fog source with a multi-outlet distribution manifold, adjustable LED lighting and camera interfaces for documented airflow studies. A central controller regulates tracer delivery while the wheeled equipment rack organizes hoses, power and recording connections. Interchangeable outlet bars support broad filter-face coverage or focused release around process equipment.
الخصائص الرئيسية
Multi-outlet manifold supports uniform fog delivery across wide test zones.
Adjustable illumination increases contrast of fine airflow structures.
Central controls coordinate fog output and accessory operation.
Modular hoses and outlet bars adapt to rooms, isolators and filling lines.
Mobile rack keeps study components organized between test positions.
مخاوف المنتج للعملاء
Complex aseptic airflow studies depend on coordinated tracer placement, lighting and recording; independently assembled components can create uneven coverage and inconsistent documentation.
Separate fog, lighting and camera equipment can be difficult to coordinate.The integrated rack organizes tracer delivery, illumination and recording interfaces in one workflow.
A single fog outlet may not cover a wide process zone evenly.Modular manifolds and outlet bars distribute tracer across the selected study width.
Fine fog structures may disappear against reflective equipment surfaces.Positionable neutral LED luminaires improve contrast for video capture.
Study configurations must be reproduced across operating scenarios.Central output controls and modular labeled connection points support repeatable setup geometry.
تطبيقات نموذجية
Aseptic filling-line smoke studiesRABS and isolator airflow visualizationCleanroom dynamic airflow mappingHEPA coverage demonstrationsContainment and intervention studies
المعلمات الفنية
Representative integrated system construction is provided below; rack size, outlet geometry, camera count and hose lengths can be configured for the study protocol.
| المواد الأساسية | 316L stainless equipment rack, ultrasonic fog module, polymer hoses, LED luminaires and electronic controls |
|---|---|
| سمك اللوحة | Typically 1.0-2.0 mm for rack and controller enclosure panels |
| العرض الفعال | Approximately 600-1000 mm across the mobile system rack |
| الحد الأقصى الطول | Approximately 800-1400 mm for rack; distribution hoses available to 10000 mm |
| الصلب يواجه سمك | Typically 1.0-1.5 mm for stainless equipment enclosures and manifold components |
| الكثافة الأساسية | Approximately 7950-8000 kg/m³ for 316L stainless components |
| الموصلية الحرارية | Approximately 14-16 W/(m·K) for 316L stainless steel |
| إنهاء السطح | Brushed stainless rack with graphite controller, white hoses and black camera and lighting hardware |
| نوع المشترك | Quick-connect fog manifold, locking hose couplings and modular power and signal interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or multi-camera interfaceStraight or perforated fog barsAlternative manifold outlet countsHigh-output fog moduleBattery-backed controlsTransport cases for accessories
Planning a Airflow Visualization System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
