Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Instruments d'essai et de validation de salle blanche
Système de visualisation du flux d'air
An integrated cleanroom smoke-study platform combining controllable tracer generation, distribution, illumination and synchronized video capture.
- Integrated smoke-study workflow.
- Multi-outlet controlled fog delivery.
- Coordinated illumination and capture.
Introduction de produit
This modular system coordinates a high-purity fog source with a multi-outlet distribution manifold, adjustable LED lighting and camera interfaces for documented airflow studies. A central controller regulates tracer delivery while the wheeled equipment rack organizes hoses, power and recording connections. Interchangeable outlet bars support broad filter-face coverage or focused release around process equipment.
Key Features
Multi-outlet manifold supports uniform fog delivery across wide test zones.
Adjustable illumination increases contrast of fine airflow structures.
Central controls coordinate fog output and accessory operation.
Modular hoses and outlet bars adapt to rooms, isolators and filling lines.
Mobile rack keeps study components organized between test positions.
Préoccupations du client produit
Complex aseptic airflow studies depend on coordinated tracer placement, lighting and recording; independently assembled components can create uneven coverage and inconsistent documentation.
Separate fog, lighting and camera equipment can be difficult to coordinate.The integrated rack organizes tracer delivery, illumination and recording interfaces in one workflow.
A single fog outlet may not cover a wide process zone evenly.Modular manifolds and outlet bars distribute tracer across the selected study width.
Fine fog structures may disappear against reflective equipment surfaces.Positionable neutral LED luminaires improve contrast for video capture.
Study configurations must be reproduced across operating scenarios.Central output controls and modular labeled connection points support repeatable setup geometry.
Les applications typiques
Aseptic filling-line smoke studiesRABS and isolator airflow visualizationCleanroom dynamic airflow mappingHEPA coverage demonstrationsContainment and intervention studies
Paramètres techniques
Representative integrated system construction is provided below; rack size, outlet geometry, camera count and hose lengths can be configured for the study protocol.
| Matériaux de base | 316L stainless equipment rack, ultrasonic fog module, polymer hoses, LED luminaires and electronic controls |
|---|---|
| Panneau épaisseur | Typically 1.0-2.0 mm for rack and controller enclosure panels |
| Largeur effective | Approximately 600-1000 mm across the mobile system rack |
| Longueur maximale | Approximately 800-1400 mm for rack; distribution hoses available to 10000 mm |
| Acier face épaisseur | Typically 1.0-1.5 mm for stainless equipment enclosures and manifold components |
| Densité Core | Approximately 7950-8000 kg/m³ for 316L stainless components |
| Conductivité thermique | Environ 14 - 16 W / (m · K) pour l'acier inoxydable 316L |
| surface finie | Brushed stainless rack with graphite controller, white hoses and black camera and lighting hardware |
| Type joint | Quick-connect fog manifold, locking hose couplings and modular power and signal interfaces |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or multi-camera interfaceStraight or perforated fog barsAlternative manifold outlet countsHigh-output fog moduleBattery-backed controlsTransport cases for accessories
Planning a Airflow Visualization System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
