Airflow visualization system in three-quarter mobile rack view

Temiz Oda Test ve Validasyon Aletleri

Hava akışı görselleştirme sistemi

An integrated cleanroom smoke-study platform combining controllable tracer generation, distribution, illumination and synchronized video capture.

Integrated smoke-study workflow.
Multi-outlet controlled fog delivery.
Coordinated illumination and capture.

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This modular system coordinates a high-purity fog source with a multi-outlet distribution manifold, adjustable LED lighting and camera interfaces for documented airflow studies. A central controller regulates tracer delivery while the wheeled equipment rack organizes hoses, power and recording connections. Interchangeable outlet bars support broad filter-face coverage or focused release around process equipment.

Ana Özellikler

Integrated tracer, distribution and recording workflow improves repeatability.

Multi-outlet manifold supports uniform fog delivery across wide test zones.

Adjustable illumination increases contrast of fine airflow structures.

Central controls coordinate fog output and accessory operation.

Modular hoses and outlet bars adapt to rooms, isolators and filling lines.

Mobile rack keeps study components organized between test positions.

Müşteri Ürün Sorunları

Complex aseptic airflow studies depend on coordinated tracer placement, lighting and recording; independently assembled components can create uneven coverage and inconsistent documentation.

Separate fog, lighting and camera equipment can be difficult to coordinate.The integrated rack organizes tracer delivery, illumination and recording interfaces in one workflow.

A single fog outlet may not cover a wide process zone evenly.Modular manifolds and outlet bars distribute tracer across the selected study width.

Fine fog structures may disappear against reflective equipment surfaces.Positionable neutral LED luminaires improve contrast for video capture.

Study configurations must be reproduced across operating scenarios.Central output controls and modular labeled connection points support repeatable setup geometry.

Tipik uygulamalar

Aseptic filling-line smoke studiesRABS and isolator airflow visualizationCleanroom dynamic airflow mappingHEPA coverage demonstrationsContainment and intervention studies

Teknik parametreler

Representative integrated system construction is provided below; rack size, outlet geometry, camera count and hose lengths can be configured for the study protocol.

Temel malzemeler	316L stainless equipment rack, ultrasonic fog module, polymer hoses, LED luminaires and electronic controls
Panel kalınlığı	Typically 1.0-2.0 mm for rack and controller enclosure panels
Effective Width (Etkili Genişlik)	Approximately 600-1000 mm across the mobile system rack
Maksimum uzunluk	Approximately 800-1400 mm for rack; distribution hoses available to 10000 mm
Çelik yüz yüze kalınlığı	Typically 1.0-1.5 mm for stainless equipment enclosures and manifold components
Core Density (Çekirdek Yoğunluğu)	Approximately 7950-8000 kg/m³ for 316L stainless components
Termal İletkenlik	Approximately 14-16 W/(m·K) for 316L stainless steel
Yüzey bitirme	Brushed stainless rack with graphite controller, white hoses and black camera and lighting hardware
Ortak tip	Quick-connect fog manifold, locking hose couplings and modular power and signal interfaces
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Single or multi-camera interfaceStraight or perforated fog barsAlternative manifold outlet countsHigh-output fog moduleBattery-backed controlsTransport cases for accessories

Planning a Airflow Visualization System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun