Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Sistema de visualización de flujo de aire
An integrated cleanroom smoke-study platform combining controllable tracer generation, distribution, illumination and synchronized video capture.
- Integrated smoke-study workflow.
- Multi-outlet controlled fog delivery.
- Coordinated illumination and capture.
Introducción del producto
This modular system coordinates a high-purity fog source with a multi-outlet distribution manifold, adjustable LED lighting and camera interfaces for documented airflow studies. A central controller regulates tracer delivery while the wheeled equipment rack organizes hoses, power and recording connections. Interchangeable outlet bars support broad filter-face coverage or focused release around process equipment.
Características clave
Multi-outlet manifold supports uniform fog delivery across wide test zones.
Adjustable illumination increases contrast of fine airflow structures.
Central controls coordinate fog output and accessory operation.
Modular hoses and outlet bars adapt to rooms, isolators and filling lines.
Mobile rack keeps study components organized between test positions.
Preocupaciones del producto del cliente
Complex aseptic airflow studies depend on coordinated tracer placement, lighting and recording; independently assembled components can create uneven coverage and inconsistent documentation.
Separate fog, lighting and camera equipment can be difficult to coordinate.The integrated rack organizes tracer delivery, illumination and recording interfaces in one workflow.
A single fog outlet may not cover a wide process zone evenly.Modular manifolds and outlet bars distribute tracer across the selected study width.
Fine fog structures may disappear against reflective equipment surfaces.Positionable neutral LED luminaires improve contrast for video capture.
Study configurations must be reproduced across operating scenarios.Central output controls and modular labeled connection points support repeatable setup geometry.
Aplicaciones típicas
Aseptic filling-line smoke studiesRABS and isolator airflow visualizationCleanroom dynamic airflow mappingHEPA coverage demonstrationsContainment and intervention studies
Parámetros técnicos
Representative integrated system construction is provided below; rack size, outlet geometry, camera count and hose lengths can be configured for the study protocol.
| Materiales Core | 316L stainless equipment rack, ultrasonic fog module, polymer hoses, LED luminaires and electronic controls |
|---|---|
| Panel de espesor | Typically 1.0-2.0 mm for rack and controller enclosure panels |
| Ancho efectivo | Approximately 600-1000 mm across the mobile system rack |
| Longitud máxima | Approximately 800-1400 mm for rack; distribution hoses available to 10000 mm |
| Acero frente a espesor | Typically 1.0-1.5 mm for stainless equipment enclosures and manifold components |
| Densidad Core | Approximately 7950-8000 kg/m³ for 316L stainless components |
| Conductividad térmica | Approximately 14-16 W/(m·K) for 316L stainless steel |
| Superficie acabada | Brushed stainless rack with graphite controller, white hoses and black camera and lighting hardware |
| Tipo conjunto | Quick-connect fog manifold, locking hose couplings and modular power and signal interfaces |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or multi-camera interfaceStraight or perforated fog barsAlternative manifold outlet countsHigh-output fog moduleBattery-backed controlsTransport cases for accessories
Planning a Airflow Visualization System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
