English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Air جهاز قياس تدفق صمام
A compact cone-type airflow measurement device for direct supply and extract volume-flow checks at circular disc valves and small ventilation terminals.
- Full-flow capture at circular air valves.
- Integrated straightener controls swirl effects.
- Compact bidirectional direct-flow display.
مقدمة المنتج
This device seals a shaped low-resistance cone around a circular air valve and guides the full stream through an integrated flow straightener and sensing grid. The detachable digital meter displays supply or extract volume flow without requiring a separate area calculation. Its compact mouth is easier to position on small ceiling and wall terminals than a full-size capture hood.
الخصائص الرئيسية
Integrated straightener reduces swirl-related measurement variation.
Reversible sensing supports supply and extract terminals.
Direct volume-flow display removes manual area conversion.
Soft perimeter seal limits bypass around the valve face.
Compact handheld format suits congested ceiling locations.
مخاوف المنتج للعملاء
Circular air valves generate curved and swirling flow patterns that are difficult to quantify with a point sensor and often sit where a full-size hood cannot be positioned.
Point velocity readings are unreliable in the swirling flow near a disc valve.The cone captures the full stream and the straightener conditions it before measurement.
Air bypass around the measuring device understates terminal flow.A compliant perimeter gasket seals against the surrounding ceiling or wall surface.
Large capture hoods are awkward around closely spaced ceiling services.The compact circular cone reaches small valves with less clearance.
Supply and extract checks may otherwise require different setups.Bidirectional sensing reports both flow directions through the same cone.
تطبيقات نموذجية
Circular ceiling air-valve balancingCleanroom supply terminal verificationExtract valve flow checksSmall grille commissioningRoutine ventilation maintenance
المعلمات الفنية
Representative compact valve-flow device dimensions are listed below; cone diameter, handle reach and measurement range can be selected for terminal size.
| المواد الأساسية | Molded engineering-polymer cone, elastomer perimeter seal and differential-pressure sensing grid |
|---|---|
| سمك اللوحة | Typically 2.5-4.0 mm for the molded cone wall |
| العرض الفعال | Approximately 250-350 mm across the capture mouth |
| الحد الأقصى الطول | Approximately 400-550 mm including handle and display |
| الصلب يواجه سمك | Typically 0.5-0.8 mm for stainless sensing-grid elements |
| الكثافة الأساسية | Approximately 1050-1200 kg/m³ for the engineered polymer cone |
| الموصلية الحرارية | Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing |
| إنهاء السطح | Matte white capture cone with graphite handle, black seal and blue-gray display |
| نوع المشترك | Detachable meter coupling with sealed cone-to-grid interface and soft valve-face gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Multiple cone mouth diametersSupply/extract bidirectional meterTelescopic support handleWireless displayProtective transport bagTraceable calibration service
Planning a Air Valve Flow Measurement Device specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
